I. Recent Interests:

  - Interfacial Multiphase Flows

  - Aeroacoustics

  - Flow through and over Porous Media

  - Flow over Reactive Surface

  Research Tools: Meshless (LBM/SPH) CFD

  II.Previous Interests:

  - Surface Film Cooling

  - Turbulence

  - Aerodynamics

  - Fluid Mixing

  - Atmospheric Flows

  - Interfacial Multiphase Flows

  Research Tools: Conventional CFD

1. Azadi, E. and Taeibi Rahni, M., 2023, "A Unified Transformation Framework for Studying Various Situations of Vertical/Oblique Drop Impact on Horizontal/Inclined Stationary/Moving Flat Surfaces”, Journal of Applied Fluid Mechanics, Vol. 16, No. 11, pp. 2115-2129.

2. Azadi, E. and Taeibi Rahni, M., 2023, "A Three-dimensional Mass-conserved Multiphase Lattice Boltzmann Flux Solver for Incompressible Flows with Large Density and Viscosity Ratios”, Journal of Advances in Applied Mathematics and Mechanics, Accepted for Publication.

3. Ghorbanifar, S., Taeibi Rahni, M., Zareh, M., and Nobakhti, M.H., 2023, "Stability and Bifurcation Analysis of a Pendent Drop Using a Novel Dynamical Model”, Archive of Applied Mechanics, Vol. 93, No. 2, pp. 487-501.

4. Harbi Monfared, R., Taeibi Rahni, M., Zareh, M., Ahmadi, G., and Etemadi Haghighi, S., 2022, "Aerodynamic and Aeroacoustic Performance of a Wing with Structured Surface Inspired by Owl’s Wings”, Journal of Applied Fluid Mechanics, Vol. 5, No. 4, pp. 1243-1253.

5. Salimi, M.R., Taeibi Rahni, M., Amiri Hezaveh, A., and Zakyani Rodsari, M., 2022, "Droplet Breakup Analysis inside Porous Media at Different Porosities, Using LBM”, Journal of Aerospace Science and Technology, Vol. 15, No. 2, pp. 1253-1261.

6. Kamali Moghadam, R., Taeibi Rahni, M., Heyat Davoudian, S., and Miller, R., 2022, "Drop Behavior on Micro-Structure Super Hydrophobic Coating”, Journal of Space Science and Technology, Vol. 15, No. 1, pp. 1-11.

7. Goharain, S.K. and Taeibi Rahni, M., 2021, " The Formation of Respiratory Droplets Caused by Breathing, Coughing, and Sneezing in Patients with Covid-19 and the Role of Wearing a Mask in Controlling Its Spread”, Journal of Technology in Aerospace Engineering, Vol. 5, No. 3, pp. 37-47 (In Persian).

8. Harbi Monfared, R., Taeibi Rahni, M., and Zareh, M., 2021, "Morphing Wings-A Novel Design in Aviation Industry”, Journal of Technology in Aerospace Engineering, Vol. 4, No. 4, pp. 55-66 (In Persian).

9. Taeibi Rahni, M., 2021, "The Major Role of Fluid Mechanics in Respiratory Drop Dispersion”, Journal of Evolutions in Mechanical Engineering, Vol. 3, No. 4, pp. 1-2.

10. Ghorbanifar, S., Taeibi Rahni, M., and Zareh, M., 2021, "Three-Dimensional LBM Simulation of Oscillations of a Pendent‎ Growing Drop‎”, Journal of Technology in Aerospace Engineering, Vol. 5, No. 1, pp. 67-77 (In Persian).

11. Valizadeh, R., Abbaspour, and M., Taeibi Rahni, M., 2020, "A low cost Hydrokinetic Wells turbine system for oceanic surface waves energy harvesting”, Renewable Energy, Vol. 156, No. 3, pp. 610-623.

12. Nayebi, A. and Taeibi Rahni, M., 2022, “Numerical Study of Mass Flow and Septum Position Effects on Thrust Vectoring and Flow Structure of an ACHEON Nozzle”, Journal of Aeronautical Engineering, Vol. 24, No. 1, pp. 156-179 (In Persian).

13. Taeibi Rahni, M., Taleghani, A.S., Sheikholeslam, M., and Ahmadi, G., 2021, “Computational Simulation of Water Removal From a Flat Plate, Using Surface Acoustic Waves”, Wave Motion, Vol. 111, 102867.

14. Sheikholeslam, M., Taleghani, A.S., and Taeibi Rahni, M., 2021, “Surface Acoustic Waves as Control Actuator for Drop Removal From Solid Surface”, Fluid Dynamics Research Vol. 53, No. 4, pp. 37-47.

15. Valizadeh, R., Abbaspour, M., Taeibi Rahni, M., Saffari Pour, M., and Hulme-Smith, C., 2021, “Improved Wells Turbine Using a Concave Sectional Profile”, Preprints.

16. Sheikholeslam, M., Taleghani, A.S., and Taeibi Rahni, M., 2020, “Phenomenological Investigation of Drop Manipulation Using Surface Acoustic Waves”, Microgravity Science and Technology, Vol. 32, No. 6, pp. 1147-1158.

17. Sheikholeslam, M., Taleghani, A.S., and Taeibi Rahni, M., 2020, “Numerical Analysis of Droplet Motion over a Flat Plate Due to Surface Acoustic Waves”, Microgravity Science and Technology, Vol. 32, No. 4, pp. 647-660.

18. Taeibi Rahni, M., Zareh, M., and Ghorbanifar, S., 2020, “Innovations in Non-linear Oscillations of a Pendent Drop From a Capillary Tip During Formation and Detachment-An LBM Simulation”, Journal of Applied Fluid Mechanics, Vol. 14, No. 1, pp. 331-344 (In Persian).

19. Salimi, M.R., Taeibi Rahni, M., and Rostamzadeh, H., 2020, “Heat Transfer and Entropy Generation Analysis in a Three-Dimensional Impinging Jet Porous Heat Sink Under Local Thermal Non-equilibrium Condition”, International Journal of Thermal Sciences, Vol. 153, pp. 106348.

20. Kamali Moghadam, R., Taeibi Rahni, M., Javadi, K., and Heyat Davoudian, S., Miller, R., 2020, “Influence of New Superhydrophobic Micro-Structures on Delaying Ice Formation”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 595, pp. 124675.

21. Sheikholeslam, M., Taeibi Rahni, M., and Taleghani, A.S., 2020, “Effects of Contact Angle Hysteresis on Drop Manipulation, Using Surface Acoustic Waves”, Theoretical and Computational Fluid Dynamics, Vol. 34, No. 1, pp. 145-162.

22. Asadi, H., Taeibi Rahni, M., Akbarzadeh, A.M., Javadi, K., and Ahmadi, G., 2019, “Investigation of Hydrodynamically Dominated Membrane Rupture, Using Smoothed Particle Hydrodynamics–Finite Element Method”, Fluids, Vol. 4, No. 3, pp. 149-158.

23. Sheikholeslam, M., Taeibi Rahni, M., and Taleghani, A.S., 2019, “Multiple-Relaxation Time Color-Gradient Lattice Boltzmann Model for Simulating Contact Angle in Two-Phase Flows With High Density Ratio”, The European Physical Journal Plus, Vol. 134, No. 8, pp. 1-15.

24. Salimi, M.R., Alizadeh-Seresht, E., and Taeibi Rahni, M., 2019, “New Hybrid Finite Volume-Thermal Lattice Boltzmann Method, Based on Multi Relaxation Time Collision Operator”, International Journal of Heat and Mass Transfer, Vol. 138, pp. 1281-1294.

25. Rostamzadeh, H., Salimi, M.R., and Taeibi Rahni, M., 2019, “Pore-Scale Modeling of Rarefied Gas Flow in Fractal Micro-Porous Media, Using Lattice Boltzmann Method (LBM)”, Journal of Thermal Analysis and Calorimetry, Vol. 135, No. 3, pp. 1931-1942.

26. Gerdroodbary, M.B., Ganji, D.D., Taeibi Rahni, M., Pruiti, B., and Moradi, R., 2019, “Development of Knudsen Thermal Force for Mass Analysis of CH4/He Gas Mixture”, International Journal of Modern Physics C, Vol. 30, No. 1, p. 1950002.

27. Fallah, K., Taeibi Rahni, M., and Ghaderi, A., 2019, “Numerical Simulation of Non-Newtonian Fluid over a Stationary Circular Cylinder in the Channel”, Journal of Mechanical Engineering, Vol. 49, No. 287, pp. 239-247.

28. Razmi, A.,Taeibi Rahni, M., Massah, H.R., Terashima, and H., Moezzi, H., 2019, “Computational Simulation of Shock-Bubble Interaction, using a Front-Tracking/Ghost Fluid Method”, Journal of Applied Fluid Mechanics, Vol. 12, No. 2, pp. 631-645.

29. Maneshian, B., Javadi, K., and Taeibi Rahni, M., 2019, “Flow Control in a Cavity with Tiny-Obstacles on the Walls for Mixing Enhancement Part I: Flow Physics”, Journal of Applied Fluid Mechanics (JAFM), Vol. 12, No. 1, pp. 11-23.

30. Maneshian, B., Javadi, K., and Taeibi Rahni, M., 2018, “Bubble Dynamics in Rotating Flow Under an Accelerating Field”, Physics of Fluids, Vol. 30, No. 8, pp. 082108.

31. Rostamzadeh, H., Salimi, M.R., and Taeibi Rahni, M., 2018, “Permeability Correlation with Porosity and Knudsen Number for Rarefied Gas Flow in Sierpinski Carpets”, Journal of Natural Gas Science and Engineering, Vol. 56, pp. 549-567.

32. Gerdroodbary, M.B., Ganji, D.D., Taeibi Rahni, M., and Vakilipour, S., 2018, “Effect of Geometrical Parameters on Radiometric Force in Low-Pressure Mems Gas Actuator”, Microsystem Technologies, Vol. 24, No. 5, pp. 2189-2198.

33. Rezavand, M., Taeibi Rahni, M., and Rauch, W., 2018, “An ISPH Scheme for Numerical Simulation of Multiphase Flows With Complex Interfaces and High Density Ratios”,Computers & Mathematics with Applications, Vol. 75, No. 8, pp. 2658-2677.

34. Gerdroodbary, M.B., M Mosavat, Ganji, D.D., Taeibi Rahni, M., and Moradi, R., 2018, “Application of Molecular Force for Mass Analysis of Krypton/Xenon Mixture in Low-Pressure Mems Gas Sensor”, Vacuum, Vol. 150, pp. 207-215.

35. Taeibi Rahni, M., Sheida, M., and Esfahanian, V., 2018, “Numerical Investigation of Non-homogeneity and Specific Area in Porous Media on Packed Bed Reactor Performance by Lattice Boltzmann Method”, Modares Mechanical Engineering, Vol. 17, No. 12, pp. 446-456 (In Persian).

36. Forghani, F., Taeibi-Rahni, M., and Asadollahi-Ghohieh, A., 2018 " Optimization of Freestream Flow Effects on Thrust Shock Vector Control Nozzle", Journal of Applied Fluid Mechanics, Vol. 11, No. 2, pp. 347-361.

37. Tabatabaei, H.R., Boroomand, M., and Taeibi-Rahni, M., 2017"Application of Algebraic Anisotropic Turbulence Model in Numerical Solution of Triple jet Film Cooling", Fluid Mechanics & Aerodynamics Journal, (In Persian).

38. Sheida, M., Taeibi-Rahni, M., and Esfahanian, V., 2017 " A New Approach to Reduce Memory Consumption in Lattice Boltzmann Method on GPU", Journal of Applied Fluid Mechanics, Vol. 10, No. 1, pp. 55-67.

39. Forghani, F., Taeibi-Rahni, M., and Asadollahi-Ghohieh, A., 2017 "Numerical Investigation of Optimization of Injection Angle Effects in Fluidic Thrust Vectoring", Journal of Applied Fluid Mechanics, Vol. 10, No. 1, pp. 157-167.

40. Maneshian, B., Javadi, Kh., Taeibi-Rahni, M., and Miller, R., 2016 " Droplet dynamics in rotating flows", Advances in Colloid and Interface Science, Vol. 236, pp. 63-82.

41. Hosseini-Vajargah, N., Salimi, M.R, and Taeibi-Rahni, M., 2016, "Numerical Simulation of Film Cooling around a Gas Turbine Blade via Partially Averaged Navier-Stokes Approach (PANS)", Amirkabir Journal, Vol. 48, No. 3, pp. 267-280 (In Persian).

42. Rambarzin, F., Shervin-Tabar, M.T., Taeibi-Rahni, M., and Tabatabaei-Nejad, S.A., 2016, " Energy Transfer in a Liquid Filled Elemental Passage of a Porous Medium for Permeability Enhancement Due to Pulsation of a Vapor Bubble", MECHANIKA, Vol. 22, No. 1, pp. 25-30.

43. Salimi, M.R., Taeibi-Rahni, M., Ramezanizadeh, M., and Farhadi-Azar, R., 2016 "Film Cooling Effectiveness Enhancement Applying another Jet in the Upstream Neighbor of the Main Jet Using LES Approach", Journal of Applied Fluid Mechanics, Vol. 9, No. 1, pp. 33-42.

44. Jafari, Y., Taeibi-Rahni, M., and Adamian, A., 2015 "Computational Modeling of Flow and Natural Convective Heat Transfer in Porouse Media, Using LBM –Effects of Nano-fauidicity and Domain Geometry", Fluid Mechanics & Aerodynamics Journal, Vol. 3, No. 4, pp. 17-30 (In Persian).

45. Sherafatmandjoor, Sh., Taeibi-Rahni, M., and Nor Azwadi Che Sidik, 2015 "Formation and Breakup Patterns of Falling Droplets", Numerical Heat Transfer, Part A, Vol. 68, pp. 1023-1030.

46. Ghadyani, M., Taeibi-Rahni, M., and Esfahanian, V., 2015 "The Use of Shock-Detecting Sensor to Improve the Stability of Lattice Boltzmann Model for High Mach Number Flow", International Journal of Modern Physics C , Vol. 26, No. 1, 21 pages.

47. Taeibi-Rahni, M., Kermani Ranjbar, A., and Ali-Akbari Bidokhti, A.A., 2015 "Study of a rising bubble undergoing collisions with porous medium using lattice Boltzmann method", Journal of Geo-Marine Sciences, Accepted for Pub.

48. Ramian, P.,Taeibi-Rahni, M., and Adamian, a., 2015"Numerical Simulation of Effects of Nano-Fluid and Flow Boundaries in Natural Convective Heat Transfer in the Presence of a Magnetic Field , Using Lattic Boltzmann Method" , Modarres Mechanical Engineering Journal, Vol. 15,No. 6, pp. 167-178, (In Persian).

49. Salimi, M.R., Taeibi-Rahni, M., and Jam, F., 2015 "Pore-scale simulation of fluid flow passing over a porously covered square cylinder located at the middle of a channel, using a hybrid MRT-LBM-FVM approach", Theoretical and Computational Fluid Dynamics, Vol. 29, No. 3, pp. 171-191.

50. Salimi, M.R., Taeibi-Rahni, M., and Jam, F., 2015 "Heat Transfer Analysis of a Porously Covered Heated Square Cylinder, Using a Hybrid Navier-Stokes Lattice-Boltzmann Method", International Journal of Thermal Sciences, Vol. 91, pp. 59-75.

51. Daemi, M., Taeibi-Rahni, M., and Massah, H.R., 2015 "Study of Accoustic Bubble Cluster Dynamics Using a Lattice-Boltzmann Model", Chin. Phys. B, Vol. 24, No. 2, 8 pages.

52. Razavand, M., and Taeibi-Rahni, M., 2015 "Numerical Simulation of Multiphase Flows Using SPH Projection Method", Applied Mathematics Letters, Vol. 3, No. 4, pp. 277-287.

53. Ramian, P., Taeibi-Rahni, M., and Adamian, A., 2015 "Computational Simulation of Effects of Nano-Fluidicity and Flow Boundaries on Natural Heat Transfer in Presence of Magnetic Field, Using LBM", Scientific Research Monthly Journal Modarres Mechanical Engineering, Vol. 15, No. 6, pp. 167-178, (In Persian).

54. Alizadeh, M., Taeibi-Rahni, M., and Eftekhari-Yazdi, M., 2015 "Numerical Investigation of Emulsion Process in Micro channels, Using Index-Function Lattice Boltzmann Method", Modarres Mechanical Engineering, Vol. 99, No. 9, pp. 1-11, (In Persian).

55. Jafari, I., Mahdavy-Moghadam, H., and Taeibi-Rahni, M., 2014 "Effect of Radial Fins on Natural Convection between Horizontal Circular and Square Cylinders", Advances in Theoretical and Applied Mechanics, Vol. 52, No. 3, pp. 827-837.

56. Abbasi, M., Ganji, D.D., and Taeibi-Rahni, M., 2014 "MHD Flow in a Channel using New Combination of Order of Magnitude Technique and HPM", International Journal on Technical and Physical Problems of Engineering – IJTPE, Vol. 21, No. 2, pp. 317-321.

57. Karbaschi, M., Taeibi-Rahni, M., Javadi, A., Cronan, C.L., Schano, K.H., Faraji, S., Won, J.Y., Ferri, J.K., Krägel, J., Miller, R., 2014 " Dynamics of Drops-Formation,Growth, Oscillation, Detachment, and Coalescence", Advances in Colloid and Interface Science, Vol. 222, No. 413, 12 Pages.

58. Saleki-Haselghorbi, N., Shervani-Tabar, M.T., Taeibi-Rahni, M., and Dodvand, A., 2014 "Numerical study on the oscillation of a transient bubble near a confined free surface for droplet generation", Theoretical and Computational Fluid Dynamics, Vol. 28, No. 4, pp. 449-472.

59. Karegarsharifabad, H., Shafii, M.B., Taeibi-Rahni, M., and Abbasspoor, M., 2014 "Exergy Analysis of a Flat Plate Solar Collector in Combination with Heat Pipe", Int. Journal of Environmental Research, Vol. 8, No. 1, pp. 39-48.

60. Tabatabaei, H.R., Boroomand, M., and Taeibi-Rahni, M., 2014 "Experimental and Numerical Study of on-Engine Turbocharger Performance under the Inlet Pulsating Flow", Fluid Mechanics & Aerodynamics Journal, Vol. 2, No. 4, pp. 9-21, (In Persian).

61. Rad, M., Taeibi-Rahni, M., and Moaven, Kh., 2013 "Experimental Investigation of Viscous Drag Reduction, Regarding Super hydrophobic Nano-Coating in Laminar and Turbulent Flows", Fluid Mechanics & Aerodynamics Journal, Vol. 2, No. 2, pp. 65-73, (In Persian).

62. Beigzadeh-Abbassi, M., Taeibi-Rahni, M., and Beigzadeh-Abbassi, M.R., 2013 "A Comparative Study of Three Different Bounce-Back Scheme Based Methods for a Moving Curved Solid Boundary Implementation in the Lattice Boltzmann Method", Fluid Mechanics & Aerodynamics Journal, Vol. 2, No. 3, pp. 11-24, (In Persian).

63. Zareh, M., Shokuhmand, M.R., Salimpur, M.R., and Taeibi-Rahni, M., 2013 "Numerical Simulation and Exprimental Analysis of Refrigeratants Flow through Adiabatic Helical Capillary Tube", International Journal of Refrigeration, Vol. 98, pp. 299-309.

64. Taeibi-Rahni, M., Esfahanian V., and Salari, M., 2013 "Investigation of Flow Around a Confined Elliptical Cylinder Using the Lattice Boltzmann Method", European Journal of Scientific Research, Vol. 15, No. 1, pp. 8-13.

65. Farhadiazar, R., Ramezanizadeh, M., Taeibi-Rahni, M., and salimi, M., 2013 "Compound Triple Jets Film Cooling Improvements via Velocity and Density Ratios-Large Eddy Simulation", Journal of Fluids Engineering-Transactions of the Asme, Vol. 1, No. 1.

66. Taeibi-Rahni, M., Khayyat, M., and Ali-Abbasi, R., 2013 "Computational Simulation of Turbulent Flow and Forced Heat Transfer in a Wide Tube, with Porous Material in the Middle and Boundary Parts", Mech. Aerospace Eng. J., Vol. 9, No. 1, pp. 77-85, (In Persian).

67. Karegarsharifabad, H., Jahangiri Mamouri, S., Shafii, M.B., and Taeibi-Rahni, M., 2013 "Experimental Investigation of the Effect of Using Closed-Loop Pulsating Heat Pip on the Performance of a Flat Plate Solar Collector", Journal of Renewable and Sustainable Energy, Vol. 5, No. 1, pp. 1-12.

68. Moaven, Kh., Rad, M., and Taeibi-Rahni, M., 2013 "Experimental Investigation of Viscous Drag Reduction of Super hydrophobic Nano-Coating in Laminar and Turbulent Flows", Experimental Thermal and Fluid Science, Vol. 51, No.2013, pp. 239-243.

69. Taeibi-Rahni, M., Esfahanian, V., and Salari, M., 2013 "Investigation of Flow around a Confined Elliptical Cylinder Using the Lattice-Boltzmann Method", World Applied Sciences Journal, Vol. 15, No. 1, pp. 8-13.

70. Abdeh-kakha, H., Taeibi-Rahni, M., and Ramezanizadeh, M., 2013 "A Large Eddy Simulation Approach to Numerical Simulation of Acoustic Field Formed by Jet Injection into a Cross Flow", Journal of Acoustical Engineering Society of Iran, Vol. 1, No. 1, pp. 14-22, (In Persian).

71. Khaki, M., Taeibi-Rahni, M., and Ganji, D.D., 2013, "Analytical Solutions of Electro-Kinetic Flow in Nano-Fluidic Components, Using Hes Homotopy Perturbation Method", J. of Theoretical and Applied Mechanic (JTAM), Vol. 51, No. 2, pp. 265-274.

72. Moayyedi, M.K., Taeibi-Rahni, M., and Sabetghadam, F., 2013 “Fast Estimation of Aerodynamic Data and Aerodynamic Inverse Design, Using Proper Orthogonal Decomposition Method”, J. Sharif, Vol. 1, No. 3, pp. 3-10, (In Persian).

73. Tabatabaei, H.R., Boroomand, M., and Taeibi-Rahni, M., 2012 "An Investigation on Turbocharger Turbine Performance Parameters Under Inlet Pulsating Flow", Journal of Fluids Engineering, Vol. 134, No. 8, 8 Pages.

74. Kargar Sharif Abadi, H., Shafiei, M.B., Taeibi-Rahni, M., and Abbaspoor-Tehranifard,M., 2012 "Experimental Study of Oscillatory Heat Pipe in Large Scale Thermal Performance of a Flat Plate Solar Water Heater", Journal of Fluid and Structure Mechanics, Vol. 2, No. 1, pp. 57-66.

75. Farhadiazar, R., Ramezanizadeh, M., Taeibi-Rahni, M., and Salimi, M.R., 2012 "Investigation of Velocity Ratio Difference between the Controlling Jets and the Main Jet in the Compound Triple Jets Arrangement to Modify the Film Cooling Effectiveness, Using the LES Approach", Aerospace Science and Technology Journal, Vol. 1, No. 1, pp. 2-11, (In Persian).

76. Salimi, M.R., Taeibi-Rahni, M., Ramezanizadeh, M., and Farhadiazar, R., 2012 "Investigation of Density Ratio Effects on Behavior of Injected Jet into a Hot Turbulent Flow, Using Different Turbulence Models", Aerospace Science and Technology Journal, Vol. 1, No. 2, pp. 2-14, (In Persian).

77. Moayyedi, M.K., Sabetghadam, F., and Taeibi-Rahni, M., 2012 "Calibrated Low-dimensional POD Dynamical for Simulation of Unsteady incompressible Flows", Fluid Mechanics & Aerodynamics Journal, Vol. 1, No. 1, pp. 29-41.

78. Beigzadeh-Abbasi, M., Taeibi-Rahni, M., Beigzadeh-Abbasi, M.R., and Beigzadeh-Abbasi, A.R., 2012 "A Comparative Study of Three Different Bouce-Back Scheme Based Methods for a Moving Curved Solid Boundary Implementation in the Lattice-Boltzmann Method", American Journal of Science, Vol. 8, No. 3, pp. 218-227.

79. Aboulhasanzadeh, B., Thomas, S., Taeibi-Rahni, M., and Tryggvason, G., 2012 "Multiscale Computations of Mass Transfer from Buoyant Bubbles", CHEMICAL ENGINEERING SCIENCE, Vol. 75, No. 2012, pp. 456-467.

80. Abasi, M., Ganji, D.D., and Taeibi-Rahni, M., 2012 "Analytical Solutions of Slip MHD Flow in a Channel with Permeable Boundaries", Advances in Mechanical Engineering, Vol. 93, No. 1, pp. 86-93.

81. Khayat, M., Ali-Abbasi, R., and Taeibi-Rahni, M., 2012 "Numerical Simulation of Turbulent Flow and Heat Transfer in a B-Type Section Pipe with Porous Bottom Wall", International Journal of Advanced Manufacturing Technology, Vol. 5, No. 5, pp. 61-69.

82. Abbasi, M., Ganji, D.D., and Taeibi-Rahni, M., 2012 "Analytical Solutions of Slip MHD Flow in a Channel with Permeable Boundaries", European Journal of Scientific Research, Vol. 93, No. 1, pp. 86-93.

83. Salimi, M. R., Taeibi-Rahni, M., Ramezanizadeh, M., and Farhadi-Azar, R., 2012 "An Innovation in Film Cooling of the Gas Turbine Blades, Applying an Upstream Jet", Journal of Aerospace Science and Technology-JAST, Vol. 9, No. 1.

84. Taeibi-Rahni, M., Khayyat, M., and Ali-Abbasi, R., 2012, "Computational Simulation of Turbulent Flow and Forced Heat Transfer in a Wide Tube, with Porous Material in the Middle and Boundary Parts", Mech. Aerospace Eng. J., Vol. 9, No. 1, pp. 77-85, (In Persian).

85. Tabatabaei, H.R., Boroomand, M., and Taeibi-Rahani, M., 2012, "Steady and Unsteady Flow Analysis in the On-Engine Small Turbocharger Experimentally and Numerically", Int. J. Since and Eng. Investigations, Vol. 1, No. 3.

86. Beigzadeh-Abbassi, M., Taeibi-Rahani, M., Beigzadeh-Abbassi, M.R., and Beigzadeh-Abbassi, A.R., 2012 "A Comparative Study of Three Different Bounce-Back Scheme Based Methods for a Moving Curved Solid Boundary Implementation in the Lattice-Boltzmann Method", J. American Science, Vol. 8, No. 3, pp. 218-227.

87. Khaki, M., Taeibi-Rahni, M., and Ganji, D.D., 2012 "Analytical Solution of Electro-osmotic Flow in rectangular Nano-channels by Combined Sine Transform and MHPM", J. Electrostatics, Vol. 70, No. 5, pp. 451-456.

88. Taeibi-Rahni, M., Ramezanizadeh, M., Ganji, D.D., Darvan, A., Ghasemi, A., Soleimani, S., and Bararnia, H., 2011 “Comparative Study of Large Eddy Simulation of Film Cooling, Using a Dynamic Global-Coefficient Subgrid Scale Eddy-Viscosity Model with RANS and Smagorinsky Modeling”, Int. Communications in Heat and Mass Transfer, Vol. 38, Issue 5, pp. 659-667.

89. Farhadiazar, R., Ramezanizadeh, M., Taeibi-Rahni, M., and Salimi, M., 2011 “Compound Triple Jets Film Cooling Improvements via Velocity and Density Ratios-Large Eddy Simulation”, J. Fluids Eng.-Transaction of the ASME, Vol. 131, pp. 1-13.

90. Taeibi-Rahni, M., and Ahmadzadeh, F., 2011 "Numerical Simulation of the Interaction between a Large Bubble and a Boundary Layer", Aerospace Mechanics Journal, Vol. 7, No. 3, pp. 91-101, (IN Persian).

91. Ghodsi, R., Taeibi-Rahni, M., Ramezanizadeh, M., and Jarrahbashi, D., 2011 "Application of V2-F-K-W Turbulence Model in Film Cooling Turbulent Flow on a Flat Plate", Scientific-Research Aeronautical Engineering Journal, No. 1, pp. 53-62.

92. Tabatabaei, H.R., Borumand, M., and Taeibi-Rahni, M., 2011 "Experimental and Numerical Comparison of One- and Three-dimensional Flow in Performance of a Gasoline Engine Turbocharger, 75", Modarres Technical and Engineering Journal, Tarbiat Modarres University, Vol. 11, No. 4, pp. 75-88, (In Persian).

93. Taeibi-Rahni, M., Ganji, D.D., Khaki, M., 2010 “Analytical Solution of Nano Boundary Layer Past Stretching Surfaces by Using Hes Homotopy Perturbation Method”, Nonlinear Science Letters D: Conference Series, Vol. 2, pp. 53-56.

94. Taeibi-Rahni, M., Ramezanizadeh, M., Darvan, A., Ganji, D.D., Soleimani, S., Ghasemi A., and Bararnia, H., 2010 “Large-Eddy Simulation of Three-dimensional Turbulent Jet into a Cross Flow, Using a Dynamic Subgrid-Scale Eddy Viscosity Model with a Global Model Coefficient”, World Applied Sciences J., Vol. 9, No. 10, pp. 1191-1200.

95. Ghodsi, S.R., Mehri, B., and Taeibi-Rahni, M., 2010 “A Parallel Implementation of Gram-Schmidt Algorithm for Dense Linear System of Equations”, Int. J. of Computers and Their Applications, Vol. 5, No. 7, pp. 16-20.

96. Ghodsi, S.R. and Taeibi-Rahni, M., 2010 “A Novel Parallel Algorithm Based on the Gram-Schmidt Method for Triodiagonal Linear Systems of Equations”, Math. Problems in Eng., Vol. 2010, 17 pages.

97. Naderi, A., Darbandi, M., and Taeibi-Rahni, M., 2010 “Developing a Mixed FEV-ALE Approach to Solve Unsteady Fluid Flow with Moving Boundaries”, Int. J. Numerical Methods in Fluids, Vol. 63, No. 1, pp. 40–68.

98. Taeibi-Rahni, M. and Baiati, M., 2010 “Computational Analysis of the Flow inside a Turbocharger Compressor”, Mech. and Aerospace Eng J., Imam Hossein Univ., Vol. 6 .No. 1, pp.1-10 (In Persian).

99. Taeibi-Rahni, M., Sabetghadam, F., and Moayyedi, M.K., 2010 “Low-dimensional Proper Orthogonal Decomposition as a Fast Approach for Aerodynamic Data Estimation”, J. Aerospace Eng., Vol. 23, No.1, pp. 44-54.

100. Taeibi-Rahni, M. and Ghodsi, S.R., 2009 “Generation of Inflow Condition for Large Eddy Simulation”, Aerospace Eng. Sci. and Research, Islamic Azad Univ., Vol. 1, No. 1, pp. 37-45, (In Persian).

101. Taeibi-Rahni, M., Ghodsi, S.R., and Sheikhaleslam noori, S.M., 2009 "Study of Different Types of Hybrid LES/RANS Approach", Aerospace Eng. Sci. and Research, Islamic Azad Univ., Vol. 2, No. 3, pp. 37-48, (In Persian).

102. Asadi, B., Saidi, M.H., Taeibi-Rahni, M., and Ahmadi, G., 2009 “Computational Simulation of Hydrodynamic Convection in a Rising Bubble under Microgravity Condition”, Int. J. Eng., Vol. 22, No. 3, pp. 295-305.

103. Saidi, M.H., Taeibi-Rahni, M., Asadi, B., and Ahmadi, G., 2009 “Computational Simulation of Marangoni Convection under Microgravity Condition”, Scientia Iranica, Vol. 16, No. 6, pp. 513-524.

104. Heidari, M.R., Farahani, M., Soltani, M.R., and Taeibi-Rahni, M., 2009 “Investigations of Supersonic Flow around a Long Axisymmetric Body”, Scientia Iranica, Vol. 16, No. 6, pp. 534-544.

105. Taeibi-Rahni, M., Ghodsi, S.R., Ramezanizadeh, M., and Jarrahbashi, D., 2009 “The Effect of Interface Location and Inflow Generation in Hybrid LES/RANS Simulation”, Computational Fluid Dynamics J., Vol. 18, No.1.

106. Taeibi-Rahni, M. and Ghodsi, S.R. 2008 “Hybrid LES/RANS Approach in Turbulent Flow Simulations”, Aerospace Eng. Sci. and Research, Islamic Azad Univ., Vol. 1, No. 2, pp. 1-14, (In Persian).

107. Sabetghadam, F., Taeibi-Rahni, M., and Moayyedi, M.K., 2008 “Gappy Low-dimensional POD: A Powerful Tool for Data Reconstruction of Unsteady Flow Fields”, Computational Fluid Dynamics J., Vol. 17, No. 3, pp.156-164.

108. Javadi, Kh., Darbandi, M., and Taeibi-Rahni, M., 2008 “Three-dimensional Compressible/Incompressible Turbulent Flow Simulation Using a Pressure-Based Algorithm”, Computers & Fluids, Vol. 37, No. 6, pp. 747-766.

109. Salmanzadeh, A.R., Taeibi-Rahni, M., Ebrahimi, M., and Javadi, Kh. 2007 “Analytical and Numerical Study of Domain Decomposition Patterns for Parallel CFD Simulation”, Computational Fluid Dynamics J., Vol. 16 .No. 2.

110. Ramezanizadeh, M., Saiedi, M.H., and Taeibi-Rahni, M., 2007 “Computational Simulation of Two-dimensional Turbulent Film Cooling, Using LES Approach and Considering Density Ratio Effects”, Mech. and Aerospace Eng. J., Imam Hossein Univ., Vol. 3, No. 1, pp. 91-103, (In Persian).

111. Ramezanizadeh, M., Taeibi-Rahni, M., and Saidi, M.H., 2007 “Investigation of Density Ratio Effects on Normally Injected Cold Jets into a Hot Cross Flow”, Archive of Appl. Mech. , Vol. 77, No. 11, pp. 835-847.

112. Javadi, Kh., Taeibi-Rahni, M., and Darbandi, M., 2007 “Jet into Cross Flow Boundary Layer Control: An Innovation in Gas Turbine Blade Cooling”, AIAA J., Vol. 45, No. 12, pp. 2910-2925.

113. Ramezanizadeh, M., Taeibi-Rahni, M., and Saidi, M.H., 2007 “Large Eddy Simulation of Multiple Jets into a Cross Flow”, Scientia Iranica, Vol. 14, No. 3, pp. 240-250.

114. Javadi, A., Bastani, D., and Taeibi-Rahni, M., 2006 “Interfacial Tension Effects on the Mass Transfer During Drop Formation: Hydrodynamics and Interfacial Turbulence Aspects”, In J. Colloid and Interface Science, Vol. 347, No. 3, pp. 167-174.

115. Javadi, A., Bastani, D., and Taeibi-Rahni, M.. 2006 “Mass Transfer during Drop Formation in a Nozzle: New Flow Expansion Model”, AIChE J., Vol. 53, No. 3, pp. 895-910.

116. Mahjoob, Sh., Taeibi-Rahni, M., Javadi, Kh., and Tolouei, E., 2006 “Computational Investigations of Jet Aspect Ratio Effects in Turbulent Film Cooling at Different Injection Angles”, IASME J. (Transactions), Vol. 1, No.1, pp. 71-77.

117. Najafi, M., Daemi, M., Massah, H.R., Moghimi, M., Khorramshadi, H., and Taeibi-Rahni, M., 2006 “Solving a Coupled Wave System with Mixed Boundary Conditions via ADM”, WSEAS Transactions on Communications, Vol. 5, No. 6, pp. 1177-1181.

118. Najafi, M., Taeibi-Rahni, M., Javadi, Kh., and Hosseinizadeh, S.F., 2006 “Approach to Analytical Solution of Navier-Stokes Equations, Utilizing Adomian Decomposition Method-Jet Impinging Flow Application”, WSEAS Transactions on Math., Vol. 5, No. 5, pp. 507-514.

119. Najafi, M., Ramezanizadeh, M., Taeibi-Rahni, M., and Saidi, M.H., 2006 “Analytical Solution of Fin/Slab Heat Transfer and Property Distribution, Using Adomian Decomposition Method”, WSEAS Transactions on Math., Vol. 5, No. 7, pp. 794-805.

120. Darbandi, M., Taeibi-Rahni, M., and Naderi, A.R., 2006 “Firm Structure of the Separated Turbulent Shear Layer Behind Modified Backward-Facing Step Geometries”, Int. J. Num. Methods for Heat and Fluid Flow, Vol. 16, No. 7, pp. 803-826.

121. Najafi, M., Taeibi-Rahni, M., and Aavani, Kh., 2006 “An Approximated Solution to 2-D Incompressible Navier-Stokes Equations via Adomian Decomposition Method”, WSEAS Transactions on Math., Vol. 5, No. 7, pp. 872-885.

122. Mahjoob, Sh. and Taeibi-Rahni, M., 2006 “Parameters Affecting Turbulent Film Cooling-Reynolds Averaged Navier-Stokes Computational Simulation”, AIAA J., Thermophysics and Heat Transfer, Vol. 20, No. 1, pp. 92-100.

123. Taeibi-Rahni, M., Ramezanizadeh, M., and Keimasi, M.R., 2005 “Numerical Simulation of Three-dimensional Film Cooling, Using RANS Approach and LES”, Mech. and Aerospace Eng. J., Imam Hossein Univ., Vol. 1, No. 3, pp.11-20, (In Persian).

124. Taeibi-Rahni, M. and Ramezanizadeh, M., 2005 “Investigation of Three-dimensional Cavity Flow, Using Large Eddy Simulation Approach”, J. Aerospace Science and Tech., JAST, Vol. 2, No. 2, pp. 1-10.

125. Moshaii, A., Sadighi, R., Taeibi-Rahni, M., and Daemi, M., 2004 “Effects of Liquid Second Viscosity in High Amplitude Sonoluminescence”, Chin. Phys. Letter, Vol. 21, No. 2.

126. Moshaii, A., Sadighi, R., and Taeibi-Rahni, M., 2004 “Effects of Bulk Viscosity in Non-linear Bubble Dynamics”, J. Phys. Condensed Matter, Vol. 16, pp. 1687-1694.

127. Ghadak, F., Taeibi-Rahni, M., and Ashrafzadeh, A., 2003 “Inverse Design of Nozzles and Straight and Curved Diffusers, Based on Specified Velocity Distribution on Walls in an Incompressible Flow”, Payam Bavar J., Imam Hossein Univ., No. 17, pp. 3-13 (In Persian).

128. Taeibi-Rahni, M. and Tavakkoli-Gheinani, B., 2002 “3-D Numerical Simulation of Ventilation of an Automobile Cabin”, Automotive Scientific J., Iran Univ. of Science & Tech., pp. 29-41(In Persian).

129. Taeibi-Rahni, M. and Keimasi, M.R., 2002 “Numerical Simulation of Film Cooling of a Turbulent Flow, Using Standard k-ε and Shear Stress Transport Turbulence Models”, Sharif J., Sharif Univ. of Tech., No. 22, pp. 59-65, (In Persian).

130. Keimasi, M.R. and Taeibi-Rahni, M., 2001 “Numerical Simulation of Jets in a Cross Flow, Using Different Turbulence Models”, AIAA J., Vol. 39, No. 12, pp. 2268-2277.

131. Raiszadeh, M. and Taeibi-Rahni, M., 2000 “Design of a Closed Loop Water Tunnel with on Open Channel”, Mechanics Letter, Mech. Eng. Dept., Sharif Univ. of Tech, Vol. 2, No. 6, pp. 43-47 (In Persian).

132. Ghadak, F. and Taeibi-Rahni, M., 1999 “Steady Solution of the Euler Equation in a 2-D Nozzle at Subsonic, Transonic, and Supersonic Regimes”, Payam Bavar J., Imam Hossein Univ., pp. 2-9 (In Persian).

133. Loth, E., Taeibi-Rahni, M., and Tryggvason, G., 1997 “Deformable Bubbles in a Free Shear Layer”, Int. J. Multiphase Flow, Vol. 23, No. 5, pp. 977-1001.

134. Taeibi-Rahni, M. and Loth, E., 1996 “Forces on a Large Cylindrical Bubble in an Unsteady Rotational Flow”, AIChE J., Vol. 42, No. 3, pp. 638-648.

135. Taeibi-Rahni, M., Loth, E., and Tryggvason, G., 1994 “Flow Modulation of a Planar Free Shear Layer with Large Bubbles-Direct Numerical Simulation”, Int. J. Multiphase Flow, Vol. 20, No. 6, pp. 1109-1128.

136. Taeibi-Rahni, M., 1989 “Aerospace Engineering in Two Technical Universities”, J. Transportation Industry, No.51, pp. 22-23, (In Persian).

137. Taeibi-Rahni, M., 1988 “Requirements for Establishment of Higher Educational Programs in Aerospace Engineering”, Sharif J., Sharif Univ. of Tech., Tehran, Iran, (In Persian).

1. محمد طیبی رهنی، محمدرضا سلیمی و مهدی رمضانی‌زاده، 1400 "خنک کاری لایه ای"، پژوهشگاه هوافضا

2. محمد طیبی رهنی و رامین یوسفی، 1397 " اصول ارائه های رسمی نوشتاری و گفتاری (فارسی و انگلیسی؛ استانداردهای نوین)"، فدک ایساتیس

3. Taeibi-Rahni, M., Karbaschi, M., and Miller, R., Editors 2015 "Computational Methods for Complex Liquid-Fluid Interfaces", CRC Press, U.S.A.

4. (محمد طیبی رهنی، پیمان پژول، 1391 "اصول پرواز"، پژوهشگاه هوافضا (هنوز چاپ نشده

5. محمد طیبی رهني، فواد ظهوري، هادي مهرابیان و اشکان رسولي 1385، ”تئوري و تحلیل مسائل آيرودينامیک،“ انتشارات دانشگاه صنعتي شریف، تهران

6. محمد طیبي رهني، محمد رضا سلطاني و آرش طاهري 1383، ”مقدمه‌اي بر آئرودينامیک ورودي‌ها“، پژوهشگاه هوافضا

1. M. Taeibi Rahni, K. G. Mohammadi, 2020, "Healthcare Technology Solutions for Pandemics – A Roadmap Chapter-۴۱: CFD Analysis of COVID-۱۹ Dispersion via Speaking, Breathing, Coughing, and (or) Sneezing", Springer Nature Switzerland AG

2. Hamidi-Beheshti, M.T., Najafi, M., Azadegan, M., and Taeibi-Rahni, M., 2015 "Computational Methods for Complex Liquid-Fluid Interfaces------Chapter 20: Numerical Solution, Stability and Control of Acoustic Cavitation - Bubble Dynamics", CRC Pres, U.S.A.

3. Taeibi-Rahni, M., Rezavand, M., Mazaheri, I., Karbaschi, M., and Miller, R., 2015 "Computational Methods for Complex Liquid-Fluid Interfaces------Chapter 8: Meso-scale Computational Techniques in Interfacial Science- Smoothed Particle Hydrodynamics Method", CRC Press, U.S.A.

4. Najafi, M., Taeibi-Rahni, M., Daemi, M., Massah, H.R., and Mokhtari-Wernosfaderani, Z., 2015 "Computational Methods for Complex Liquid-Fluid Interfaces------Chapter 19: Approximate Analytical Solution via ADM and Numerical Simulation of Acoustic Cavitation - Bubble Dynamics", CRC Press, U.S.A.

5. Karbaschi, M., Taeibi-Rahni, M., Bastani, D., and Miller, R., 2015 "Computational Methods for Complex Liquid-Fluid Interfaces------Chapter 9: Macro-scale Computational Techniques in Interfacial Science", CRC Press, U.S.A.

6. Taeibi-Rahni, M., Karbaschi, M., Khaki, M., Haghshenas, M., Rezavand, M., and Miller, R., 2015 "Computational Methods for Complex Liquid-Fluid Interfaces------Chapter 7: Meso-scale Computational Techniques in Interfacial Science- Lattice Boltzmann Method", CRC Press, U.S.A.

7. Heidari, M.R., Farahani, M., Soltani, M.R., and Taeibi-Rahni, M., 2011 "Wind Tunnels and Experimental Fluid Dynamics Research------Chapter 28: Investigations of Supersonic Flow around a Long Axisymmetric Body".

8. Javadi, A., Bastani, D., and Taeibi-Rahni, M. 2011, “Interfacial Mass Transfer of Growing Droplet in Liquid-Liquid Systems”, Max-Plank-Institute, Germany.

9. Javadi, A., Bastani, D., and Taeibi-Rahni, M. , 2011 " Bubble and Drop Interfaces------Chapter:XIX--Interfacial Mass Transfer of Growing Droplet in Liquid-Liquid System", Koninklijke Brill NV.

1. جعفری، ی.، طیبی رهنی، م.، سلیمی، م.ر.، میلر، ر.، 1401 " شبیه سازی عددی سقوط و فروپاشی یک قطره منفرد به وسیله مدل چندفازی میدان فازی بقایی روش شبکه بولتزمن"، بیست و یکمین کنفرانس بین المللی انجمن هوافضای ایران، دانشگاه علم و صنعت، تهران، ایران

2. جعفری، ی.، مفتخر حسینی، م.، هاشمی مهنه، س.ح.، طالب‌زاده، ا.، طیبی رهنی، م.، 1401 " بررسی جنبه های حقوقی مفهوم مدیریت ترافیک فضایی"، بیستمین کنفرانس بین المللی انجمن هوافضای ایران، ایران

3. جعفری، ی.، مفتخر حسینی، م.، هاشمی مهنه، س.ح.، طالب‌زاده، ا.، طیبی رهنی، م.، 1401 " ایران و نظام حقوقی «پسماندهای فضایی»"، بیستمین کنفرانس بین المللی انجمن هوافضای ایران، ایران

4. جعفری، ی.، مفتخر حسینی، م.، هاشمی مهنه، س.ح.، طالب‌زاده، ا.، طیبی رهنی، م.، 1401 " پسماند فضایی در نهادهای حقوقی بین المللی"، بیستمین کنفرانس بین المللی انجمن هوافضای ایران، ایران

5. جعفری، ی.، مفتخر حسینی، م.، هاشمی مهنه، س.ح.، طالب‌زاده، ا.، طیبی رهنی، م.، 1401 " بررسی پیمان آرتمیس به عنوان دروازه ای برای بازگشت بشر به فضا"، بیستمین کنفرانس بین المللی انجمن هوافضای ایران، ایران

6. جعفری، ی.، مفتخر حسینی، م.، هاشمی مهنه، س.ح.، طالب‌زاده، ا.، طیبی رهنی، م.، 1401 " مدیریت ترافیک فضایی (تعریف، فواید، موانع و چالش ها)"، بیستمین کنفرانس بین المللی انجمن هوافضای ایران، ایران

7. حربی منفرد، ر.، طیبی رهنی، م.، زارع، م.، مساح، ح.ر.، 1401 " شبیه سازی عددی آئرودینامیکی و هواصوتی یک بال شکلپذیر با سطحی زبری مربعی شکل با الهام از بال جغد در یک جریان تراکم ناپذیر آشفته"، هشتمین کنگره انجمن علوم صوتی ایران (ملی)- اص‌ا ۱۴۰۱، ایران

8. طیبی رهنی، م.، شادخواه، م.، کبریائی، ا.، سلیمی، م.ر.، جعفری، ی.، 1400 " بررسی عملکرد مدل میدان فازی بقایی برای تعقیب مرز در روش شبکه بولتزمن"، نوزدهمین کنفرانس دینامیک شاره‌ها، تهران، ایران

9. یزدانی دیزیچه، ح.، طیبی رهنی، م.، سلیمی، م.ر.، جعفری، ی.، 1400 " شبیه سازی عددی برخورد یک قطره با یک سطح صاف در حضور جریان جانبی با استفاده از روش شبکه بولتزمن"، نوزدهمین کنفرانس دینامیک شاره‌ها، تهران، ایران

10. صفوی، س.م.م.، طیبی رهنی، م.، سلیمی، م.ر.، 1400 " شبیه سازی دوبعدی فروپاشی یک حباب در مجاورت گوشه ۹۰ درجه با روش مرزمیانی پخش شونده"، نوزدهمین کنفرانس دینامیک شاره‌ها، تهران، ایران

11. طیبی رهنی، م.، سلیمی، م.ر.، محسنی کفشگر کلائی، ا.ح.، جعفری، ی.، 1400 " مطالعه عددی دو بعدی تاثیرات میدان الکتریکی روی تغییر شکل قطرات، با استفاده از روش ترکیبی حجم محدود-شبکه بولتزمن"، نوزدهمین کنفرانس دینامیک شاره‌ها، تهران، ایران

12. حربی منفرد، ر.، طیبی رهنی، م.، زارع، م.، 1400 " شبیه سازی عددی آئرودینامیکی و هواصوتی یک بال شکل پذیر به شکل دم اررگی با الهام از بال جغد در بک جریان تراکم ناپذیر آشفته"، نوزدهمین کنفرانس دینامیک شاره‌ها، تهران، ایران

13. جعفری، ی.، طیبی رهنی، م.، میلر، ر.، قربانی‌فر، ش.، 1400 " کنترل زمان تشکیل و جدایش قطره و اندازه آن با تغییرات عدد باند با بهره گیری از شبیه سازی عددی با استفاده از مدل میدان فازی بقایی در روش شبکه بولتزمن"، نوزدهمین کنفرانس دینامیک شاره‌ها، تهران، ایران

14. ضیاتبار، س.ه.، طیبی رهنی، م.، 1400 " طراحی یک بال شکل پذیر با تحریک سطح فوقانی به کمک بهینه سازی تابع شکل پذیری در جریان زیر صوت"، نوزدهمین کنفرانس دینامیک شاره‌ها، تهران، ایران

15. طیبی رهنی، م.، نایبی، ع.ر.، 1400 " اثر دبی جرمی بر ساختار جریان و میزان بردار رانش نازل آچئون به کمک شبیه سازی عددی جریان تراکم پذیر آشفته"، نوزدهمین کنفرانس دینامیک شاره‌ها، تهران، ایران

16. جعفری، ی.، طیبی رهنی، م.، میلر، ر.، 1399 " سازوکارهای تشکیل و جدایش قطره از یک نازل مویین تحت اثر تحریک صوتی (کاربردها، انواع و چالش‌ها و نحوه شبیه‌سازی عددی)"، هفتمین کنگره انجمن مهندسی صوتیات ایران (ملی)- اص‌ا 1399، ایران

17. مظفری، م.، حربی منفرد، ر.، جعفری، ی.، حمید‌زاده، م.ح.، طیبی رهنی، م.، مساح، ح.ر.، 1398 " تعیین موقعیت جوّ صوتیّات در کشور و تجویز راهبرد کلان مناسب برای آن"، ششمین کنگره انجمن مهندسی صوتیات ایران (ملی)- اص‌ا 1398، ایران

18. جعفری، ی.، طیبی رهنی، م.، جوادی، خ.، 1398 " مطالعه حرکت نوسانی آشوبناک یک قطره برخورد‌کننده با سطح جامد آبدوست/آبگریز با استفاده از شبیه‌سازی عددی"، سومین کنفرانس سیستم‌های دینامیکی آشوبناک، ایران

19. جعفری، ی.، سلیمی، م.ر.، طیبی رهنی، م.، 1398 " شبیه‌سازی عددی تأثیر بکارگیری نانوسیال و میدان مغناطیسی در کنترل یا تشدید اثرات آشوبناکی در جریان جابجایی طبیعی با استفاده از روش شبکه بولتزمن"، سومین کنفرانس سیستم‌های دینامیکی آشوبناک، ایران

20. جعفری، ی.، شادخواه، م.، محسنی کفشگر کلائی، ا.ح.، طیبی رهنی، م.، 1398 " مطالعه تاثیر بکارگیری روش‌های گسسته‌سازی مختلف بر رفتار عبارت غیرخطی شتاب جابه‌جایی در جریان سیال با استفاده از شبیه‌سازی عددی"، سومین کنفرانس سیستم‌های دینامیکی آشوبناک، ایران

21. جعفری، ی.، یزدانی دیزیچه، ح.، سلیمی، م.ر.، طیبی رهنی، م.، 1398 " مطالعه مدل میدان فازی بقایی به عنوان روشی مقاوم در برابر آشوبناکی عددی در شبیه‌سازی مرز مشترک جریان‌های چند فازی با استفاده از روش شبکه بولتزمن"، سومین کنفرانس سیستم‌های دینامیکی آشوبناک، ایران

22. جعفری، ی.، مظفری، م.، طیبی رهنی، م.، 1398 " مطالعه اثرات برخی عوامل اغتشاشی بر روی قطر متوسط قطرات تشکیل شده در پاشش سوخت مایع درون یک محفظه احتراق با استفاده از شبیه‌سازی عددی"، سومین کنفرانس سیستم‌های دینامیکی آشوبناک، ایران

23. جعفری، ی.، حمید‌زاده، م.ح.، مظفری، م.، حربی منفرد، ر.، طیبی رهنی، م.، مساح، ح.ر.، 1398 " اولویت بندی و تحلیل سلسله مراتبی علوم، آموزش، محصولات و فناوری های جوّ صوتیّات در کشور"، ششمین کنگره انجمن مهندسی صوتیات ایران (ملی)- اص‌ا 1398، ایران

24. مظفری، م.، حمید‌زاده، م.ح.، حربی منفرد، ر.، جعفری، ی.، طیبی رهنی، م.، مساح، ح.ر.، 1397 " شناخت جو، بررسی پدیدیه ها و انتشار صدا در آن"، پنجمین کنگره انجمن مهندسی صوتیات ایران، ایران

25. مظفری، م.، حمید‌زاده، م.ح.، حربی منفرد، ر.، جعفری، ی.، طیبی رهنی، م.، مساح، ح.ر.، 1397 " طبقه بندی علوم، محصولات و فن آوری های جو صوتیات"، پنجمین کنگره انجمن مهندسی صوتیات ایران، ایران

26. حربی منفرد، ر.، مظفری، م.، طیبی رهنی، م.، مساح، ح.ر.، 1397 " بررسی عملکرد نانو ذرات فلزی بر هواصوتیات احتراق"، پنجمین کنگره انجمن مهندسی صوتیات ایران، ایران

27. حربی منفرد، ر.، مظفری، م.، جعفری، ی.، طیبی رهنی، م.، مساح، ح.ر.، 1397 " بررسی عملکرد و کاربرد مولدهای صوتی جوی نوین"، پنجمین کنگره انجمن مهندسی صوتیات ایران، ایران

28. Rostamzadeh, H., Salimi, M.R., Taeibi-Rahni, M., 2017 "pore scale modeling of rarified gas flow in micro fractal porousmedia, using LBM", 3rd Iranian Conference on Heat and Mass Transfer-ICHMT2017

29. Razmi, A., Jafari, Y., Taeibi-Rahni, M., Massah, H.R., 2017 "numerical study of the interaction of weak shock with a cylindrical R22 bubble, using front-tracking/ghost-fluid method", 2nd international conference on mechanical and aerospace engineering

30. Rostamzadeh, H., Taeibi-Rahni, M., Javadi, Kh., 2017 " Flow Control and Heat Transfer in a Squared Room Applying Thin Obstacles at Walls", 25th Annual Conference of Mechanical Engineering

31. شیخ الاسلام نوری، م.، طیبی رهنی، م.، و شمس طالقانی، آ.، 1396 " شبيه سازي عددي القاي نوسانات و جابجايي در قطرات با استفاده از امواج آکوستيکي سطحي فراصدا "، چهارمین کنگره انجمن مهندسی صوتیات ایران، پژوهشگاه هوافضا، ایران.

32. شیخ الاسلام نوری، م.، طیبی رهنی، م.، و شمس طالقانی، آ.، 1396 " کاربرد روش LBM در مسائل آکوستيک"، چهارمین کنگره انجمن مهندسی صوتیات ایران، پژوهشگاه هوافضا، ایران.

33. جزیرئیان، ح.، طیبی رهنی، م.، و سلیمی، م.ر.، 1396 " شبيه سازي فرآيند خنک کاري لايه اي با استفاده از مدل جبري غير ايزوتروپ آشفتگي"، سومين کنفرانس سراسري دانش و فناوري مهندسي مکانيک و برق ايران، تهران، ایران.

34. جزیرئیان، ح.، طیبی رهنی، م.، و آدمیان، آ.، 1396 " ارزيابي تاثيرات بکارگيري مدل جبري غير ايزوتروپ آشفتگي در خنک کاري لايه اي با جت هاي سه گانه"، سومين کنفرانس سراسري دانش و فناوري مهندسي مکانيک و برق ايران، تهران، ایران.

35. Razmi, A., Jafari, Y., Taeibi-Rahni, M., Masah, H.R., 2017 "Numerical Study of a R22-air Shock Tube, Using Front-tracking/ghost-fluid Method", 2nd International Conference on Mechanical & Aerospace Engineering, Kharazmi University, Tehran, Iran.

36. Razmi, A., Jafari, Y., Taeibi-Rahni, M., Masah, H.R., 2017 "Numerical Simulation of a Helium-air Shock Tube, Using a Hybrid Numerical Method", 2nd International Conference on Mechanical & Aerospace Engineering, Kharazmi University, Tehran, Iran.

37. Razmi, A., Jafari, Y., Taeibi-Rahni, M., Masah, H.R., 2017 "Computational Investigation of the Shock Wave Strength on Mach Contoure in a Helium Bubble Passed a Shock Wave", 2nd International Conference on Mechanical & Aerospace Engineering, Kharazmi University, Tehran, Iran.

38. Razmi, A., Jafari, Y., Aghaalimesgar, A.R., Taeibi-Rahni, M., Ahmadian, H., and Masah, H.R., 2017 "Computational Investigation of Mach Number Effects on Density Changes in a Helium-air Shock Tube, Using a Front-Tracking/Ghost-Fluid Method", 3rd Conference of Iranian Acostics Engeneering Society, Sharif University of Technology, Iran.

39. اویسی، س.، طیبی رهنی، م.، و مساح، ح.م.، 1395 " مطالعه‌ي تاثير ويژگي‌هاي محيط متخلخل بر امواج آيروآکوستيکي عبوري از آن با استفاده از شيوه شبکه بولتزمن"، سومین کنگره انجمن مهندسی صوتیات ایران، دانشگاه صنعتی شریف، ایران

40. اویسی، س.، طیبی رهنی، م.، و مساح، ح.م.، 1395 " مطالعه‌ي تاثير ويژگي‌هاي منبع امواج آيروآکوستيکي بر امواج عبوري از محيط متخلخل با استفاده از شيوه شبکه بولتزمن"، سومین کنگره انجمن مهندسی صوتیات ایران، دانشگاه صنعتی شریف، ایران

41. سلیمی، ح.، طیبی رهنی، م.، و مساح، ح.م.، 1395 " شبيه‌سازي انتشار موج صوتي و رفتار آن در برخورد با يک حباب در مايع به شيوه شبکه بولتزمن"، سومین کنگره انجمن مهندسی صوتیات ایران، دانشگاه صنعتی شریف، ایران

42. سلیمی، ح.، طیبی رهنی، م.، و مساح، ح.م.، 1395 " شبيه‌سازي انتشار موج صوتي در محيط با گراي سرعت صدا"، سومین کنگره انجمن مهندسی صوتیات ایران، دانشگاه صنعتی شریف، ایران

43. سبزیان، م.، مظلومی، س.، طیبی رهنی، م.، و مساح، ح.م.، 1395 " شبيه‌سازي عددي صوتيّاتي مقادير ويژه‌ي بدنه‌ي ساز سه‌تار با در نظر گرفتن اندرکنش صدا-سازه"، سومین کنگره انجمن مهندسی صوتیات ایران، دانشگاه صنعتی شریف، ایران

44. شیخ¬الاسلام نوری، م.، طیبی رهنی، م.، و شمس طالقانی، آ.، 1395 "حل معادله‌ي موج خطي و غير خطي با استفاده از روش تفاضل محدود رانگ کوتاي با خطاي پراکندگي و پخش کم و مرتبه‌ي سه بالادست"، سومین کنگره انجمن مهندسی صوتیات ایران، دانشگاه صنعتی شریف، ایران

45. شیخ¬الاسلام نوری، م.، طیبی رهنی، م.، و شمس طالقانی، آ.، 1395 "بررسي فيزيکي القاي نوسانات و جابجايي در قطرات با استفاده از امواج آکوستيکي سطحي فراصدا "، سومین کنگره انجمن مهندسی صوتیات ایران، دانشگاه صنعتی شریف، ایران

46. جعفری، ی.، رزمی، ا.، طیبی رهنی، م. و مساح، ح.م.، 1395"شبيه‌سازي رفتار يک حباب تپنده با استفاده از روش ترکيبي رديابي جبهه/سيال مجازي"، سومین کنگره انجمن مهندسی صوتیات ایران، دانشگاه صنعتی شریف، ایران

47. Razmi, A., Jafari, Y., Taeibi-Rahni, M., and Masah, H.R., 2016 "Computational Investigation ofMach Number Effects on Helium-air Shock Tube Problem, Using a Hybrid Front-Tracking/Ghost-Fluid Method", 2nd International Congress on Technology Engineering Science , Malysia.

48. Razmi, A., Jafari, Y., Taeibi-Rahni, M., and Masah, H.R., 2016 " Numerical Simulation of the Interaction of Weak Shock Waves with a Cylinderical R22 Bubble, Using a Hybrid Front_Tracking/Ghost-Fluid Method ", 2nd International Congress on Technology Engineering & Science , Malysia.

49. Fallah, K., and Taeibi-Rahni, M., 2016 "Numerical study of Droplet Formation in Cross-Junction Microchannel", 2nd International Congress on Technology Engineering & Science , Malysia.

50. Moezi-Rafee, H., and Taeibi-Rahni, M., 2016 "Numerical Simulation of Two-Dimension Sonoluminescence Phenomenon, Using Front Tracking and virtual Fluid Methods", The 15th Iranian Aerospace Society Conference, Tehran, Iran.

51. Zare-Chavoshi, M., Ebrahimi, A., and Taeibi-Rahni M., 2016 "Numerical Investigation of the Effect of Freestream Mach No. on Performance of a Supersonic Symmetric Hybrid Nozzle", The 15th Iranian Aerospace Society Conference, Tehran, Iran.

52. Nirooee, M.H., and Taeibi-Rahni, M., 2016 "Evaluation of the Effect of Camber on Static Longitudinal Stability of an Airfoil in Ground Effect", The 15th Iranian Aerospace Society Conference, Tehran, Iran.

53. Forghani, F., Asadollahi-Ghohieh, A., and Taeibi-Rahni, M., 2016 "Numerical Investigation of the Effect of Aerodynamic Change of External Flow on Control and Orientation of Thrust Vector", The 15th Iranian Aerospace Society Conference, Tehran, Iran.

54. Taeibi-Rahni, M., Ramezanizadeh, M., and Mehrjoo, A.R., 2016 "Investigation of Turbulent Flow on a Backward Step, Using LES and an Explicit Subgrid Scale Model", The 15th Iranian Aerospace Society Conference, Tehran, Iran.

55. Nirooee, M., Taeibi-Rahni, M., and Mohamadi, M., 2016 "Evaluation of the Effect of the Form of Lower Surface on Aerodynamic of an Airfoil in Ground Effect", Conference of New Findings in Aerospace and Related Sciences.

56. Gharaee, M., Ramezanizadeh, M., and Taeibi-Rahni, M., 2016 "Numerical Simulation of Film Cooling Improvement, Using a Single Stage Plasma DBD Operator", The Second National Conference of Flow, Heat, and Mass Transfer, Isfahan, Iran.

57. Maneshian, B., Javadi, Kh., and Taeibi-Rahni, M., 2016 "Numerical Investigation of Bubble Dynamics in Rotating Flow, Using LBM", The 16th Conference of Fluid Dynamics, Kermanshah, Iran.

58. Fllah, K., Taeibi-Rahni, M., Mohammadzadeh, A., and Najafi, M., 2016 "Numerical Simulation of the Formation of Drop in a T-shape Micro Channel, Using LBM", The 16th Conference of Fluid Dynamics, Kermanshah, Iran.

59. Fallah, K., Taeibi-Rahni, M., Mohammadzadeh, A., and Najafi, M., 2016 "Numerical Simulation of the Formation of Drop in a Concentric Micro Channel", 24th International Conferences of Mechanical Engineering of Iran, Yazd, University of Yazd, Iran.

60. Gharaee, M., Ramezanizadeh, M., and Taeibi-Rahni, M., 2016 "Numerical Investigation of Active Control of the Separation of the Turbulent Flow in a Backward Step, under the Influence of a Plasma Actuator", The 15th Iranian Aerospace Society Conference, Tehran, Iran.

61. Jafari, Y., Taeibi-Rahni, M., and Haghshenas, M., 2015 "The Study of Free Convection Heat Transfer in Porous Media, for Various Circular Geometries, Using Lattice Boltzmann Method", The 23rd International Annual Conference, of Iranian Mechanical Engineering Society (ISME 2015), Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran, (In Persian).

62. Ramian, P., Taeibi-Rahni,M., Jafari, Y., and Haghshenas, M., 2015 "Simulation of Free Convection Heat Transfer of Nano-Fluid under the Effect of Magnetic Field, Using Lattice Boltzmann Method", The 23rd International Annual Conference, of Iranian Mechanical Engineering Society (ISME 2015), Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran, (In Persian).

63. Sohrabi, M., Taeibi-Rahni, M., and Adamian, A., 2015 "Simulation of Flow over a Cylinder Covered with a Porous Layer", The 14th Conference of Iranian Aerospace Society, Iranian Scientific &Industrial Research Organization, Tehran, Iran, (In Persian).

64. Torabi, M., and Taeibi-Rahni, M., 2015 "Numerical Simulation of Flow in Porous Media, Using Large Simulation Approach", The 14th Conference of Iranian Aerospace Society, Iranian Scientific &Industrial Research Organization, Tehran, Iran, (In Persian).

65. Jafari, Y., Taeibi-Rahni, M., and Adamian, A., 2015 "Numerical Simulation the Effect of Magnetic Field on National Convection Heat Transfer of a Nano-Fluid, Using Lattice-Boltzmann Method", The 14th Conference of Iranian Aerospace Society, Iranian Scientific &Industrial Research Organization, Tehran, Iran, (In Persian).

66. Ramian, P., Taeibi-Rahni, M., and Adamian, A., 2015 "Numerical Simulation Effect of Magnetic Field on Natural Convection Heat Transfer with Lattice-Boltzmann Method", The 14th Conference of Iranian Aerospace Society, Iranian Scientific &Industrial Research Organization, Tehran, Iran, (In Persian).

67. Maneshian, B., Javadi, Kh., and Taeibi-Rahni, M., 2015 "Numerical Investigation of Droplet of Dynamics in Recirculating Flows Using LBM", 2nd Conference on Heat Transfer and Fluid Flow (HTFF15), Barcelona, Spain.

68. Karbasch, M., Kairaliyeva, T., Javadi, A., Taeibi-Rahni, M., Cronan, C.L., Aidarova, S.B., Kragel, J., and Miller, R., 2015 “Dynamic Interaction in the Process of Drop Breakup and Necking", 6th International Workshop on Bubble and Drop Interfaces, 2015, Golm Germany, Germany.

69. Taeibi-Rahni, M., 2014 "Hydrodynamic Challenges in Complex Fluid-Fluid Interfaces Keynote Speaker", Dynamics of complex fluid-fluid interfaces, Monte Verita, Ascona, Switzerland.

70. Taeibi-Rahni, M., Alizade, M., Bararnia, H., Seyyedi, S.M., Haghshenas, M., Javadi, A., Karbaschi, M., Lotfi, M., and Miller, R., 2014"Three-dimensional Numerical Simulation of Rising Bubbles Passing by a Fixed Cylindrical Obstacle, Using a Lattice Boltzmann Method", 2nd International Conference on Numerical Methods in Multiphase Flows ICNMMF-II, Potsdam, Germany.

71. Javadi, A., Karbaschi, M., Bastani, D., Kovalchuk, V.I., Javadi, K., Lotfi, M., Taeibi-Rahni, M.,and Miller, R., 2014 "Marangoni Instabilities Experiment and CFD Simulation: Challenges for Convective Mobile Interfaces", 2nd International Conference on Numerical Methods in Multiphase Flows ICNMMF-II, Potsdam, Germany.

72. Taeibi-Rahni, M., Alizade, M., Haghshenas, M., Salimi, H., Najafi, M., and Miller, R., 2014 "Applicability of Lattice Boltzmann Method in Simulation of Drops and Bubbles Formation and Transport", International Conference on Numerical Analysis and Applied Mathematics (ICNAAM-2014), Rhodes, Greece.

73. Kairaliyeva, T.G.,Taeibi-Rahni, M., Karbaschi, M.,Aidarova, S.B., and Miller, R., 2014 "Adsorption Dynamics of Ionic Surfactants at Liquid-Liquid Interfaces", CollNanoInd 2014, Almaty City, Kazakhstan.

74. Goodarzi-Ardakani, V., Taeibi-Rahni, M., and Ebrahimi-Fordoei, E., 2014 "Numerical simulation of Heat Transfer and Particle Deposition in Human reciprocity airways", The 2th Irainan Conference on Heat and Mass Transfer-ICHMT2014,Faculty of Mech. Eng., Semnan University, Semnan, Iran, (In Persian).

75. Alizadeh., M., Haghshenas, M., Taeibi-Rahni, M., and Eftekhari-Yazdi, M., 2014 "Investigation upon Obstacle Effects on Droplet Formation in Co-flowing Micro-channel (Emulsion) Using Lattice Boltzmann Method",The 13th Iranian Aerospace Society Conference, Faculty of new Sciences & Technologies, University of Tehran, Tehran, Iran, (In Persian).

76. Alizadeh., M., Haghshenas, M., Taeibi-Rahni, M., and Eftekhari-Yazdi, M., 2014"Investigation on Non-dimensional Numbers Influencing Droplet Formation in Cross-junction Micro-channels by Lattice Boltzmann Method", The 13th Iranian Aerospace Society Conference, Faculty of new Sciences & Technologies, University of Tehran, Tehran, Iran.

77. Alizadehseresht, E., Salimi, M.R., Taeibi-Rahni, M., and Nezamabadi, A.R., 2013 "Investigation of Lattice Boltzmann Method (MRT) Performance in Numerical Modeling of Conjugate Heat Transfer, in Rectangular Fins", National Conf. on Mech. Eng., Malayer Univ., Malayer, Iran, (In Persian).

78. Haghshenas, M. and Taeibi-Rahni, M., 2013 "Simulation of Gravity-Driven droplet Formation and Detachment with Lattice Boltzmann Method", The 21th Annual (Int.) Conf. on Mech. Eng., K.N. Toosi Univ., Tehran, Iran, (In Persian).

79. Taeibi-Rahni, M., Esfahanian, V., and Salari, M., 2013 "Lattice Boltzmann Simulation of Flow around a Confined Elliptical Cylinder", The 21th Annual (Int.) Conf. on Mech. Eng., K.N. Toosi Univ., Tehran, Iran, (In Persian).

80. Haghshenas, M., Taeibi-Rahni, M., and salimi, M.R., 2013 "Lattice Boltzmann Simulation of Droplet Collision Dynamic Using Index Function Model", the 7th Iranian Student Conf. on Mech. Eng., Tehran Univ., Tehran, Iran, (In Persian).

81. Alizadeh, M., Taeibi-Rahni, M., Haghshenas, M., and Eftekhari-Yazdi, M., 2013 "Numerical Simulation of Droplet Formation in Cross-Shape Microchannels Using Lattice Boltzmann Method", the 7th Iranian Student Conf. on Mech. Eng., Tehran Univ., Tehran, Iran, (In Persian).

82. Taeibi-Rahni, M., Esfahanian, V., and Salari, M., 2013 "Numerical Simulation of Flow Over Two Elliptical Cylinders in Tandem Arrangement by Lattice Boltzmann method", The 12th Iranian Aerospace Society Conf., Amir Kabir Univ. of Technology, Tehran, Iran, (In Persian).

83. Alizadeh-Seresht A., Salimi, M.R., Taeibi-Rahni, M., and Nezamabadi, A.R., 2013 "Computational Simulation of Conjugate Heat Transfer in a Finned Channel, Using LBM", Joint National Mech. And Computer Eng. Conf., Scientific-Applied Univ., West Azarbayjan, Iran, (In Persian).

84. Taeibi-Rahni, M., Esfahanian, V., and Salari, M., 2013 "Computational Simulation of Flow over Two Elliptic Cylinders, in Different Arrangment, Using LBM", The 21th Annual Int. Conf. Eng. Society, Khajeh-Nasir Univ. of Tech., Tehran, Iran, (In Persian).

85. Vakili, n., Taeibi-Rahni, M., Eftekhari-Yazdi, M., and Salimi, M.R., 2013 "Computational Simulation of Free Convection Heat Transfer from Electronic Printing Circuits, Using LBM", The 7th Mech. Eng. Student Conf., Tehran, Univ., Tehran, Iran, (In Persian).

86. Taeibi-Rahni, M., Esfahanian, V., Saidi, M.H., and Salari, M. 2013 "Computational Simulation of Flow over an Elliptical Cylinder, Using LBM", National Mech. Eng. Conf., Islamic Azad Univ., Aligoodarz, Iran, (In Persian).

87. Taeibi-Rahni, M., Esfahanian, V., Saidi, M.H., and Salari, M., 2012 "Boundry condition for Modeling Non-Moving Curved Wall in LBM", National Mech. Eng. Conf., Islamic Azad Univ., Aligoodarz, Iran, (In Persian).

88. Sheyda, M., and Taeibi-Rahni, M., 2012 "Parallelization of LBM in GPU, Via One-Dimentional Array", The 12th Iranian Aerospace Society Conf., Amirkabir Univ. of Thec., Tehran, Iran,(In Persian).

89. Moayyedi, M.K., Marvi, M., and Taeibi-Rahni, M., 2012 "Development of a Reduced under Model for Aerodynamic Inverse Design, Based on POD", The 1th National Aerodynamic and Hydrodynamic Conf., Aircraft Industry Research Center, Tehran, Iran, (In Persian).

90. Salimi, M.R., Nirooi, M.H., and Taeibi-Rahni, M., 2012 "Computational Simulation of a Turbulent Flow around a Building, Using VLES Approach", The 1th National Aerodynamic and Hydrodynamic Conf., Aircraft Industry Research Center, Tehran, Iran, (In Persian).

91. Ghodsi, S.R., Sekhol-Eslam-Noori, S.M., and taeibi-Rahni, M., 2012 "Inflow Boundary Condition Via Digital Filter and Corrected Transformation Matrix at the Interface between LES and URANC Hybrid Approach", The 14th Fluid Dynamics Conf., Birjand Univ., Birgand, Iran, (In Persian).

92. Sheyda, M., and Taeibi-Rahni, M., 2012 "GPU in LBM Numerical Methods", The 12th Iranian Aerospace Society Conf., Amirkabir Univ. of Tech., Tehran, Iran, (In Persian).

93. Vakili, n., Taeibi-Rahni, M., Eftekhari-Yazdi, M., and Salimi, M.R., 2012 "Computational Simulation of Free Convection Heat Transfer from Electronic Printing Circuits, Using LBM with Multiple Relaxation Time", The 12th Iranian Aerospace Society Conf., Amirkabir Univ. of Tech., Tehran, Iran, (In Persian).

94. Salimi, M.R., Taeibi-Rahni, M., Jam, F., and Khalili, A., 2012 "Studying the Flow and Heat Transfer around a Cylinder Confined in a Channel, Using a Hybrid FVM and LBM", The 12th Iranian Aerospace Society Conf., Amirkabir Univ. of Tech., Tehran, Iran, (In Persian).

95. Moayyedi, M.K., and Taeibi-Rahni, M., 2012 "Low-Dimensional Pod Model for Boundary Control and Excitaion of Viscous Burgers Equation", The 14th Fluid Dynamics Conf., Birjand Univ., Birjand, Iran.

96. Ali-Abbasi, R., Khayyat, M., and Taeibi-Rahni, M., 2012, "Investigation of Turbulent Flow and Forced Heat Transfer in a Wide Tube, Using Porous Material", The 14th Fluid Dynamics Conf., Birjand Univ., Birjand, Iran

97. Taeibi-Rahni, M., Daemi, M., and Masah, H.R., 2011"Computational Simulation Homogeneous and Non-Homogenous Cavitation, Using LBM", The 11th Iranian Aerospace Society Conf., Shahid Sattari Univ., Tehran, Iran, (In Persian).

98. Javadi, Kh., Farsiani, Y., and Taeibi-Rahni, M., 2011 "Investigation of Jet Arrangment in Tripple Jets B.h. Control, Regarding Skin Function Drag Reduction", The 11th Iranian Aerospace Society Conf., Shahid Sattari Univ., Tehran, Iran, (In Persian).

99. Moayyedi, M.K., Taeibi-Rahni, M., and Marvi, M., 2011"Aerodynamic Inverse Design of an Airfoil, Using Reduced Under Modeling and POD", The 11th Iranian Aerospace Society Conf., Shahid Sattari Univ., Tehran, Iran, (In Persian).

100. Taeibi-Rahni, M., Javadi, Kh., Kazami, K., and Salimi, M.R., 2011"Computational Simulation of Flow and Heat Transfer of Free convection Heat Transfer inside Two Non-Concentric Cylinders, Using LBM", The 11th Iranian Aerospace Society Conf., Shahid Sattari Univ., Tehran, Iran, (In Persian).

101. Taeibi-Rahni, M., Javadi, Kh., and Kazami, K., 2011 "Computational Simulation of Unsteady Flow and Heat Transfer in a Micro-Gravity Field inside a Cavity, Using LBM", The 11th Iranian Aerospace Society Conf., Shahid Sattari Univ., Tehran, Iran, (In Persian).

102. Sheykholeslsm-Noori, S.M., Ghodsi, S.R., and Taeibi-Rahni, M., 2011 " Using Hybrid LES/RANS and Digital Filter Interface Boundary Condition in a turbulence Film Cooling", The 11th Iranian Aerospace Society Conf., Shahid Sattari Univ., Tehran, Iran, (In Persian).

103. Taeibi-Rahni, M., Javadi, Kh., Kazami, K., and Salimi, M.R., 2011"Investigation of the Effects of the Location of the Ht Wall in a Caving Face Convection Heat Transfer, Using LBM", The 11th Iranian Aerospace Society Conf., Shahid Sattari Univ., Tehran, Iran, (In Persian).

104. Ebrahimi, H., Ramezanizadeh, M., and Taeibi-Rahni, M., 2011 "Investigation of the Effects of the Confining Wall of the Leading Edge Film Cooling, Using LBM", The 11th Iranian Aerospace Society Conf., Shahid Sattari Univ., Tehran, Iran, (In Persian).

105. Aliabbasi, R., Khayyat, M., and Taeibi-Rahni, M., 2011 "Computational Simulation of Flow and Heat Transfer inside a Wide Tube with Forced Porous Media in Its Middle past Having Constant Heat Flux", The 4th National Mech. Eng. Conf., Islamic Azad University, Khomeini-Shahr, Isfahan, Iran, (In Persian).

106. Abbasi, M., Ganji, D.D., and Taeibi-Rhani, M., 2011 “Analytical Solutions of Magneto-Hydro-Dynamics Flow on a Channel with Stretching Walls”, Int. Conf. on Applied Analysis and Algebra, Istanbul, Turkey.

107. Taeibi-Rhani, M., Abbasi, M., Khaki, M., andGanji, D.D., 2011 “Analytical Solution of MHD Flow in a Channel with Permeable Boundaries”, Int. Conf. on Applied Analysis and Algebra, Istanbul, Turkey.

108. Ghodsi, R. and Taeibi-Rahni, M., 2011 “Computational Expansion Area Impact on the Accuracy of Three-dimensional Turbulent Flow Simulation of a Vertical Jet in Cross Flow”, The 10th Annual Conf. of Iranian Aerospace Soc., Tarbiat Modarres Univ., Tehran, Iran (In Persian).

109. Nirooie, M.H., Salimi, M.R., and Taeibi-Rahni, M., 2011 “Numerical Simulation of Turbulent Flow around a Cylinder near a Flat Surface, Using VLES Approach”, The 10th Annual Conf. of Iranian Aerospace Soc., Tarbiat Modarres Univ., Tehran, Iran (In Persian).

110. Ghodsi, S.R., Sheikh-al-Islam, S.M., and Taeibi-Rahni, M., 2011 “Digital Filter Method for Generating Inflow Conditions in LES Approach”, The 10th Annual Conf. of Iranian Aerospace Soc., Tarbiat Modarres Univ., Tehran, Iran (In Persian).

111. Nejati, A., Ghadak, F., and Taeibi-Rahni, M., 2010 “Direct Design, Based on Three-dimensional Euler Equations with Application in Internal Subsonic and Supersonic Flows”, ISME2010, The 18th Annual Conf. of Iranian Mech. Eng. Soc., Sharif Univ. of Tech., Tehran, Iran (In Persian).

112. Moayyedi, M.K., Taeibi-Rahni, M., and Sabetghadam, F., 2010 “Developing Reduced Order Modeling (Optimal Orthogonal Decomposition) for Reconstruction of Unsteady Flow Field with Sparse Data, Using a Time Decomposition Trend”, ISME2010, The 18th Annual Conf. of Iranian Mech. Eng. Soc., Sharif Univ. of Tech., Tehran, Iran (In Persian).

113. Ghafarian, A., Ramezanizadeh, M., and Taeibi-Rahni, M., 2010 “Drag Reduction, Using the Blowing of a Secondary Fluid Having a Lower Viscosity”, ISME2010, The 18th Annual Conf. of Iranian Mech. Eng. Soc., Sharif Univ. of Tech., Tehran, Iran (In Persian).

114. Taeibi-Rahni, M., Ghodsi, R., Ramezanizadeh, M., and Jarahbashi, D., 2010 “Computational Simulation of 3-D Jet-into-Cross-Flow, Using VLES Approach”, The 9th Conf. of Iranian Aerospace Soc., Science and Research Branch, Islamic Azad Univ., Tehran, Iran (In Persian).

115. Taeibi-Rahni, M., Sabetghadam, F., and Ansarian, H., 2010 “A Fast Implicit Algorithm for Solution of a 2D Compressible Flow, Using an Unstructured Grid”, The 9th Annual Conf. of Iranian Aerospace Soc., Science and Research Branch , Islamic Azad Univ., Tehran, Iran (In Persian).

116. Taeibi-Rahni, M. and Ansari, A.R., 2010 “Optimal Fluid Mixing in a Laminar Flow”, The 9th Annual Conf. of Iranian Aerospace Soc., Science and Research Branch, Islamic Azad Univ., Tehran, Iran (Poster Presentation; In Persian).

117. Sabetghadam, F., Moayyedi, M.K., and Taeibi-Rahni, M., 2010 “A Fast Approach for Local Calibration of Low-dimensional Dynamical Model for Simulation of Unsteady Incompressible Flows”, The 9th Annual Conf. of Iranian Aerospace Soc., Science and Research Branch, Islamic Azad Univ., Tehran, Iran (Poster Presentation; In Persian).

118. Farhadiazar, R., Salimi, M.R., Ramezanizadeh, M., and Taeibi-Rahni, M., 2010 “Computational Study of a Novel Film Cooling Design, Using LES”, The 9th Annual Conf. of Iranian Aerospace Soc., Science and Research Branch, Islamic Azad Univ., Tehran, Iran (In Persian).

119. Ahmadian, B., Behfarshad, Gh., and Taeibi-Rahni, M., 2010 “Experimental Aerodynamic Investigation of an Automobile”, The 9th Annual Conf. of Iranian Aerospace Soc., Science and Research Branch, Islamic Azad Univ., Tehran, Iran (Poster Presentation; In Persian).

120. Baniasadi, R., Taeibi-Rahni, M., and Ramezanizade, M., 2010 “Investigation of the Jet Rotation Effects in Jet-into-Cross-Flow Problems, Using LES”, The 9th Annual Conf. of Iranian Aerospace Soc., Science and Research Branch, Islamic Azad Univ., Tehran, Iran (In Persian).

121. Ahmadian, B., Behfarshad, Gh., and Taeibi-Rahni, M., 2010 “Aerodynamic Shape Optimization of an Automobile, Using a Rare Diffuser”, The 9th Annual Conf. of Iranian Aerospace Soc., Science and Research Branch, Islamic Azad Univ., Tehran, Iran (In Persian).

122. Ghafarian, A., Taeibi-Rahni, M., and Ramezanizadeh , M., 2010 “ LES Simulation of Drag Reduction, Using Blowing of a Secondary Fluid with Smaller Viscosity”, The 9th Annual Conf. of Iranian Aerospace Soc., Science and Research Branch, Islamic Azad Univ., Tehran, Iran (In Persian).

123. Moayyedi, M, Sabetghadam, F, Taeibi-Rahni, M., 2010 “Long Time Extension of Accurate Low-dimensional Dynamical Model, Using Combined POD and Fourier Modes”, The 13th Annual (12thRegional) Fluid Dynamics Conf., Shiraz Univ., Shiraz, Iran.

124. Taeibi-Rahni, M., Ganji, D.D.,Khaki, M., 2010 “Analytical Solution of Nano Boundary Layer Flow, Past Stretching Surfaces, Using He’s Homotopy Perturbation Method”, The 3rd Int. Symp. on Non-linear Dynamics, Shanghai, China.

125. Naderi, A., Darbandi, M., and Taeibi-Rahni, M., 2009 “Investigations of the Effects of Oscillation on an Airfoil Aerodynamic Coefficients, Using an Accurate Computational Approach”, ISME2009, The 17th Annual Conf. of Iranian Mech. Eng. Soc., Tehran, Iran (In Persian).

126. Taeibi-Rahni M., Salimi M.R., Farhadiazar R., and Ramezanizadeh, M., 2009 “Investigating the Density Ratio Effects on the Hydrodynamic Jet-into-Cross-Flow Interactions and on Film Cooling Effectiveness”, ISME2009, The 17th Annual Conf. of Iranian Mech. Eng. Soc., Tehran, Iran (In Persian).

127. Taeibi-Rahni, M., Farhadiazar, R., Salimi, M.R., and Rameanizadeh, M., 2009 “Computational Study, Using LES and Triple Jets”, ISME2009, The 17th Annual Conf. of Iranian Mech. Eng. Soc., Tehran, Iran (In Persian).

128. Taeibi-Rahni, M., Farhadiazar, R., Salimi, M.R., and Ramezanizadeh, M., 2009 “Investigating the Effects of Density Difference between Jet and Cross Flow for Enhancing Film Cooling Effectiveness in a Triple Jet Film Cooling, Using LES”, The 12th Annual Fluid Dynamics Conf., Babol Univ. of Tech., Babol, Iran (In Persian).

129. Moayyedi, M.K., Taeibi-Rahni, M., and Sabetghadam, F., 2009 “Unsteady Compressible Flow Simulation, Using Dynamical Reduced Order Modeling”, The 12th Annual Fluid Dynamics Conf., Babol Univ. of Tech., Babol, Iran (In Persian).

130. Taeibi-Rahni, M., Salimi, M.R., Farhadiazar, R., and Ramezanizadeh, M., 2008 “Computational Simulation of a Jet-into-Cross-Flow, Using ν²ƒ-kω Model”, The 8th Annual Conf. of Iranian Aerospace Soc., Malek Ashtar Univ. of Tech., Isfahan, Iran (In Persian).

131. Taeibi-Rahni, M., Farhadiazar, R., Salimi, M.R., and Ramezanizadeh, M., 2008 “Computational Simulation of Jet-into-Cross-Flow, Using LES”, The 8th Annual Conf. of Iranian Aerospace Soc., Malek Ashtar Univ. of Tech., Isfahan, Iran (In Persian).

132. Abdeh-Kakha, H. and Taeibi-Rahni, M., 2008 “Computational Simulation of Flow and Acoustics in a Jet-into-Cross-Flow”, The 8th Annual Conf. of Iranian Aerospace Soc., Malek Ashtar Univ. of Tech., Isfahan, Iran (In Persian).

133. Taeibi-Rahni, M., Farhadiazar, R., Salimi, M.R., and Ramezanizadeh, M., 2008 “Investigating the Effects of Speed Differences between Large and Small Jets in Compound Triple Jet Film Cooling, Using LES Approach”, The 8th Annual Conf. of Iranian Aerospace Soc., Malek Ashtar Univ. of Tech., Isfahan, Iran (In Persian).

134. Taeibi-Rahni, M., Farhadiazar, R., Salimi, M.R., and Ramezanizadeh, M., 2008 “Hydrodynamic Investigation of Compound Triple Jets, Using LES”, The 8th Annual Conf. of Iranian Aerospace Soc., Malek Ashtar Univ. of Tech., Isfahan, Iran (In Persian).

135. Naderi, A.R., Darbandi, M., and Taeibi-Rahni, M., 2008 “Computational Simulation of a Compressible Flow with Moving Boundary, Using Hybrid FE/FV Method”, The 7th Annual Conf. of Iranian Aerospace Soc., Sharif Univ. of Tech., Tehran, Iran (In Persian).

136. Taeibi-Rahni, M. and Abolhasanzadeh, B., 2008 “Computational Simulation of Droplet Deformation, Orientation, and Migration in the Vicinity of a Wall Boundary”, The 7th Annual Conf. of Iranian Aerospace Soc., Sharif Univ. of Tech., Tehran, Iran.

137. Taeibi-Rahni, M., Sabetghadam, F., and Moayyedi, M.K., 2008 “Analysis of an Incompressible Flow over Two-dimensional Bodies, Using Optimal Orthogonal Decomposition”, The 7th Annual Conf. of Iranian Aerospace Soc., Sharif Univ. of Tech., Tehran, Iran (In Persian).

138. Jarahbashi, D. and Taeibi-Rahni, M., 2008 “Computational Simulation of Flow Resulting from the Interactions of Synthetic Jets and Turbulent Cross Flow, Using URANS Approach”, The 7th Annual Conf. of Iranian Aerospace Soc., Sharif Univ. of Tech., Tehran, Iran (In Persian).

139. Sabetghadam, F., Taeibi-Rahni, M., and Moayyedi, M.K., 2007 “Using Optimal Reduced Order Orthogonal Decomposition Method to Reconstruct Steady Flow Fields with Sparse Data”, The 1st Conf. in Aerodynamics, Aerospace Industries Organization, Mech. Tech. Flight Research Center, Iran (In Persian).

140. Kahrobaee, P., Taeibi-Rahni, M. and Javadi, Kh., 2007 “Direct Numerical Simulation of Three-dimensional Flow around a Moving Squire Section Cylinder”, The 15th Annual Conf. of Iranian Aerospace Soc., Amirkabir Univ., Tehran, Iran (In Persian).

141. Salmanzadeh, A., Javadi, Kh., and Taeibi-Rahni, M.,2007 “Film Cooling Parallel Computations, Using the SST Turbulence Model”, Par. CFD Conf., Antali, Turkey.

142. Javadi, Kh., Taeibi-Rahni, M., and Darbandi, M., 2007 “Evaluation of RANS Approach in Predicting the Physics of Incompressible Turbulent Jet-Into-Cross Flow”, ASME Int. Mech. Eng. Cong. and Expo., Seattle, Washington, U.S.A.

143. Darbandi, M., Naderi, A., and Taeibi-Rahni, M., 2007 “Evaluation of the Finite Volume Method on Moving Boundary Problems with Deformable Mesh”, The 2nd Int. Conf. in Computational Methods, Hiroshima Univ., Japan.

144. Nasiri, A., Taeibi-Rahni, M., and Saidi, M.H., 2007 “Heat Pipe Optimization through Entropy Generation Minimization”, Sun City, South Africa.

145. Salmanzadeh, A., Javadi, Kh., Taeibi-Rahni, M., and Taghizade-Manzari, M., 2007 “Parallel Computation of Turbulent Jet-Cross-Flow-Interactions, Using the SST Turbulence Model”, The 37th AIAA Conf., Miami, FL, U.S.A.

146. Zakyani, M. and Taeibi-Rahni, M., 2007 “Computation of Turbulent Flow over a Highly Curved Configuration, Using a Conventional Two-equation Turbulence Model”, The 45th AIAA Aerospace Sci. Meeting and Exhibit, Reno, Nevada.

147. Javadi, Kh., Darbandi, M., and Taeibi-Rahni, M., 2007 “3D Compressible Turbulent Channel Flow Simulation, Using an Extended Pressure Based Algorithm”, The 37th AIAA Fluid Dyn. Conf., Florida, U.S.A.

148. Naderi, A., Darbandi, M., and Taeibi-Rahni, M., 2006 “Evaluating Resolution and Stability of a Finite Element/Volume Method on a Collocated Moving Mesh”, The 6thAnnual Conf. of Iranian Aerospace Soc., Khajeh-Nasir Toosi Univ. of Tech., Iran (In Persian).

149. Taeibi-Rahni, M. and Bayati, M., 2006 “Computational and Experimental Simulation of Flow in a Turbocharger”, The 6th Annual Conf. of Iranian Aerospace Soc., Khajeh-Nasir Toosi Univ. of Tech., Iran (In Persian).

150. Taeibi-Rahni, M. and Bayati, M., 2006 “Experimental and Computational Analysis of the Flow Inside a Turbocharger Compressor”, WSEAS Conf., Caney Island, Spain.

151. Javadi, A., Bastani, D., and Taeibi-Rahni, M., 2006 “Interfacial Tension Effects on Mass Transfer During Drop Formation: Hydrodynamic and Interfacial Turbulence Aspects”, Eufoam 2006, Potsdam, Germany.

152. Javadi, A., Javadi, Kh., Kragel, J., Miller, R., Kovalchuk, V.I., Ferri, J.K., Bastani, D., and Taeibi-Rahni, M., 2006 “Oscillating Transient Flow Experiments and Analysis in Circular Micro Channels”, IMECE06, ASME Int. Mech. Eng. Cong. And Exhib. Chicago, IL, U.S.A.

153. Najafi, M., Ramezanizadeh, M., Taeibi-Rahni, M., and Saidi, M.H., 2006 “Fin and Slab Heat Transfer and Property Distribution, Using Adomian Decomposition Method”, The 9th WSEAS Int. Conf. on Applied Math., Istanbul, Turkey.

154. Najafi, M., Taeibi-Rahni, M., and Hassanpour, A., 2006 “Adomian Decomposition to Solve Navier-Stokes Equations”, AMS Annual Meeting, San Antonio, TX, U.S.A.

155. Mahjoob, Sh., Taeibi-Rahni, M., Javadi, Kh., and Toloui, E., 2006 “Computational Investigation of Jet Aspect Ratio Effects in Turbulent Film Cooling at Different Injection Angles”, IASME/WSEAS, Fluids06, Int. Conf. on Fluid Mech., Miami, Florida, U.S.A.

156. Najafi, M., Taeibi-Rahni, M., Javadi, Kh., and Hosseinizadeh, S.F., 2006 “Approximated Solution to Two-dimensional and Axisymmetric Jet Impinging Flows, Using Adomian Decomposition Method”, The 9th WSEAS Int. Conf. on Applied Math., Istanbul, Turkey.

157. Javadi, A., Taeibi-Rahni, M., Bastani, D., and Javadi, Kh., 2006 “The Effect of Hydrodynamic Characteristics on Mass Transfer During Drop Formation, Using Computational Approach”, IMECE2006-13283, ASME Int. Mech. Eng. Congress, Chicago, IL, U.S.A.

158. Hendijanifard, M., Saidi, M.H., and Taeibi-Rahni, M., 2006 “The Step Effect in Particle Removal from an Enclosure”, ESDA2006,The 8th Biannual ASME Conf. on Eng. System Design and Analysis, Torino, Italy.

159. Hendijanifard, M., Saidi, M.H., and Taeibi-Rahni, M., 2006 “The Effect of Obstacle and Vent Position on Particle Removal from an Enclosure”, ESDA 2006, The 8thBiannual ASME Conf. on Eng. System Design and Analysis, Torino, Italy.

160. Taeibi-Rahni, M., Sabetghadam, F., Moayyedi, M.K., and Doulabi, M.H., 2006 “Fast Estimation of Aerodynamic Data, Using Proper Orthogonal Decomposition Method”, The 10thAnnual Fluid Dynamics Conf., Mech. Eng. Dept., Yazd Univ., Yazd, Iran (In Persian).

161. Javadi, Kh., Taeibi-Rahni, M., and Darbandi, M., 2005 “Jet into Cross Flow Boundary Layer Control-An Innovation in Gas Turbine Blade Cooling”, The 35th AIAA Fluid Dynamics Conf. and Exhibit., Toronto, Canada.

162. Mahjoob, Sh., Taeibi-Rahni, M., Javadi, Kh., and Toloui, E., 2005 “Numerical Analysis of Film Cooling Phenomenon”, IASME/WSEAS, Fluids05, Int. Conf. on Fluid Mech., Corfu Island, Greece.

163. Ramezanizadeh, M., Taeibi-Rahni, M., and Saidi, M.H., 2005 “Large Eddy Simulation of Normally Injected Cold Jets into a Hot Cross Flow”, The 9th UK Numerical Heat Transfer Conf., Univ. of Manchester, UK.

164. Saidi, M.H., Taeibi-Rahni, M., and Hossein-Nejad, Sh., 2005 “Optimization of a Cavity Chaotic Fluid Mixing, Using Generic Algorithm”, ATC2005, The 2nd Int. Conf. on Applied Thermodynamics, Istanbul, Turkey.

165. Sabetghadam, F., Sharafatmand, Sh., and Taeibi-Rahni, M., 2005 “Extraction of Coherent Structures in a Homogeneous Two-dimensional Turbulent Flow, Using the Mean Model Decomposition Method”, CFD2005, Memorial Univ. of Newfoundland, St. John’s, Newfoundland, Canada.

166. Asadi, B., Saidi, M.H., and Taeibi-Rahni, M., 2005 “Numerical Simulation of Bubble Motion Hydrodynamics in a Quiescent Flow at Low Gravity Condition and the Role of Capillarity in the Onset of Bubble Motion”, ISME2005, The 13th Annual (Int.) Conf. of Iranian Mech. Eng. Soc., Isfahan Univ. of Tech., Isfahan, Iran (In Persian).

167. Taeibi-Rahni, M., Saidi, M.H., and Hosseini-Nejad, Sh., 2005 “Modeling the Chaotic Lorenz System, Using Recurrent Neural Network”, ICCHMT005, The 4th Int. Conf. on Comp. Heat/Mass Transfer, Paris, France.

168. Soltani, M.R., Taebi-Rahni, M., Farahani, M., and Heidari, M.R., 2005 “Flow Measurements around a Long Axisymmetric Body with Varying Cross Section”, The 43th AIAA Aerospace Science Meeting and Exhibit. Reno, Nevada, U.S.A.

169. Javadi, Kh., Taeibi-Rahni, M., and Javadi, A., 2004 “A New Method for Mixing Control of Turbulent Jet with Cross Flow Interaction for Reduction of Wall Drag Force”, The 9thAnnual Fluid Dynamics Conf., Shiraz Univ., Shiraz, Iran (In Persian).

170. Asadi, B., Taeibi-Rahni, M., and Saidi, M.H., 2004 “Numerical Simulation of Bubble Dynamics by Combined Capturing and Advancing Front Methods”, The 9thAnnual Fluid Dynamics Conf., Shiraz Univ., Shiraz, Iran (In Persian).

171. Naderi, A., Taeibi-Rahni, M., and Darbandi, M., 2004 “Turbulence Controlling Downstream of a Sudden Expansion by Multi-block Technique and Finite Element/Volume Hybrid Method”, The 9th Annual Fluid Dynamics Conf., Shiraz Univ., Shiraz, Iran (In Persian).

172. Sabetghadam, F., Taeibi-Rahni, M., and Sherafatmand, Sh., 2004 “Comparison of the Efficiency of MMD for Extracting of Coherent Structures, Using POD and Fourier Modes”, The 9thAnnual Fluid Dynamics Conf., Mech. Eng. Dept., Shiraz Univ., Shiraz, Iran (In Persian).

173. Taeibi-Rahni, M. and Sharafatmand, Sh., 2004 “Effects of Non-dimensional Parameters on Formation and Break-up of Cylindrical Droplets”, The ASME Heat Transfer/Fluids Eng. Summer Conf., Charlotte, North Carolina, U.S.A.

174. Darbandi, M., Taeibi-Rahni, M., and Naderi, A.R., 2004 “Developing an Accurate Hybrid Grid Approach to Solve Turbulent Flow in Complex Geometries”, IMEC2004, Int. Mech. Eng. Conf., Kuwait Univ., Kuwait.

175. Mahjoob, Sh. and Taeibi-Rahni, M., 2004 “Computational Study of Parameters Affecting Turbulent Flat Plate Film Cooling”, ASME Turbo Expo2004: Power for Land, Sea, and Air, Vienna, Austria.

176. Asadi, B., Taeibi-Rahni, M., and Saidi, M.H., 2004 “Numerical Simulation of Bubble Dynamics in Microgravity Condition”, Int. Sym. on Micro-Nano-Scale Energy Conversion and Transport, South Korea.

177. Taeibi-Rahni, M. and Sharafatmand, Sh., 2004 “Direct Numerical Simulation of the Dynamics of a Droplet in a Quiescent Gas”, The 2nd BSME-ASME Int. Conf. on Thermal Eng., Dhaka, Bangladesh.

178. Ramazanizadeh, M., Saidi, M.H., and Taeibi-Rahni, M., 2004 “Large Eddy Simulation of Density Ratio Effects on Two-dimensional Film Cooling”,The 2nd BSME-ASME Int. Conf. on Thermal Eng., Dhaka, Bangladesh.

179. Ramazanizadeh, M., Saidi, M.H., and Taeibi-Rahni, M., 2004 “Investigation of Density Ratio Effects in 2-d Film Cooling Large Eddy Simulation Approach”, The 2nd BSME-ASME Int. Conf. on Thermal Eng., Dhaka, Bangladesh.

180. Saidi, M.H., Taeibi-Rahni, M., and Mirkhani, Sh., 2004 “Fractal Dimensions in a 2-D Chaotic Mixing Flow”, ICMA2004, Int. Conf. on Math. and Its Applications, Kuwait Univ., Kuwait.

181. Naderi, A., Darbandi, M., and Taeibi-Rahni, M., 2004 “Numerical Simulation of Turbulent Internal Flow, Using Finite Element/Volume Method”, ISME2004, The 12th Annual (8th Int.) Conf. of Iranian Mech. Eng. Soc., Tarbiat Moddaress Univ., Tehran, Iran (In Persian).

182. Naderi, A., Darbandi. M, and Taeibi-Rahni, M., 2004 “Developing a Numerical Finite Volume Scheme for Application in Multi-block Grids with Hybrid Parts”, ISME2004,The 12th Annual (8th Int.) Conf. of Iranian Mech. Eng. Soc. Tarbiat Moddaress Univ., Tehran, Iran (In Persian).

183. Javadi, Kh., Darbandi, M., Taeibi-Rahni, M., and Javadi, A., 2004 “A New Method for Solution of Turbulent Compressible Flow at Low Mach Numbers”, The 5th Annual (2nd Int.) Conf. of Iranian Aerospace Soc., Aerospace Research Institute, Shahin-Shahr, Isfahan, Iran, pp. 407-415 (In Persian).

184. Taeibi-Rahni, M., Saidi, M.H., and Mirkhani, Sh., 2004 “Numerical Investigation of a 2-D Chaotic Mixing Flow”, The 5th Annual (2nd Int.) Conf. of Iranian Aerospace Soc., Aerospace Research Institute, Shahin Shahr, Isfahan, Iran.

185. Mahjoob, Sh. and Taeibi-Rahni, M., 2004 “Numerical Study of the Effects of Aspect Ratio of Jet Cross Section on Turbulent Flat Plate Film Cooling”, The 5th Annual (2nd Int.) Conf. of Iranian Aerospace Soc., Aerospace Research Institute, Shahin Shahr, Isfahan, Iran, pp. 91-100 (In Persian).

186. Taeibi-Rahni, M., Saidi, M.H., Raad, M., and Nejatbakhsh, A., 2004 “Numerical Modeling of Centrifugal Pump”, The 5th Annual (2nd Int.) Conf. of Iranian Aerospace Soc., Aerospace Research Institute, Shahin-Shahr, Isfahan, Iran, pp. 153-162 (In Persian).

187. Javadi, A., Javadi, Kh., Taeibi-Rahni, M., and Darbandi, M., 2004 “Numerical Simulation of Film Cooling, Using RSM Turbulence Model”, The 5th Annual (2nd Int.) Conf. of Iranian Aerospace Soc., Aerospace Research Institute, Shahin-Shahr, Isfahan, Iran, pp. 363-378 (In Persian).

188. Javadi, A., Bastani, D., and Taeibi-Rahni, M., 2004 “Transient Flow Expansion Model for Estimation of Mass Transfer During Drop Formation”, The 9th Conf. of Multiphase Flow in Industrial Plants- Rome, Italy.

189. Javadi, A., Javadi, Kh., Taeibi-Rahni, M., and Darbandi, M., 2003 “A New Approach to Improve Film Cooling Effectiveness, Using Combined Jets”, IGIC03, Int. Gas Turbine Congress, Tokyo, Japan.

190. Darbandi, M., Taeibi-Rahni, M., Gerry, E., Schneider, G.Z., Javadi, Kh., and Javadi, A., 2003 “Numerical Prediction of the Interaction between a Jet and a Turbulent Boundary Layer”, AIAA2003-3730 Paper, The 33rd AIAA Fluid Dynamics Conf., Orlando, FL, U.S.A.

191. Taeibi-Rahni, M. and Moayyedi, M.K., 2003 “Helicopter Blade Twist Effects on Unsteady Aerodynamic Loads in Forward Flight”, ISME2003, The 11thAnnual (Int.) Conf. of Iranian Mech. Eng. Soc., Ferdowsi Univ. of Mashhad, Mashhad, Iran, pp. 1083-1088 (In Persian).

192. Naderi, A.R. and Taeibi-Rahni, M., 2003 “Direct Numerical Simulation of Incompressible Flow over a Moving Squared Section Cylinder at Moderate Reynolds Numbers”, ISME2003, The 11thAnnual (Int.) Conf. of Iranian Mech. Eng. Soc., Ferdowsi Univ. of Mashhad, Mashhad, Iran, pp. 152-157.

193. Mahjoob, Sh. and Taeibi-Rahni, M., 2003 “Numerical Study of the Effects of Slot and Separated Hole Jets Geometry on Film Cooling”, The 8thAnnual Fluid Dynamics Conf., Tabriz Univ., Tabriz, Iran (In Persian).

194. Asadi, B. and Taeibi-Rahni, M., 2003 “Numerical Simulation of Compressible Flow around an Airfoil in Circular Motion”, The 8thAnnual Fluid Dynamics Conf., Tabriz Univ., Tabriz, Iran (In Persian).

195. Mahjoob, Sh. and Taeibi-Rahni, M., 2002 “Numerical Simulation of Film Cooling Phenomena, Using Unstructured Mesh and the RSM Turbulence Model”, The 2nd Scientific-Applied Conf. of Iran Aerospace Industries Organization, Tehran, Iran (In Persian).

196. Javadi, A., Javadi, Kh., Taeibi-Rahni, M., and Keimasi, M.R., 2002 “Reynolds Stress Turbulence Models for Prediction of Shear Stress Terms in Cross Flow Film Cooling-Numerical Simulation”, The 4th Int. ASME/JSME/KSME Symp. on Comp. Tech. (CFD) for Fluid/Thermal/Chemical/Stress Systems and Industrial Appl., Hyatt Regency, Vancouver, Canada.

197. Moshaii, A., Taeibi-Rahni, M., Sadighi-Bonabi, R., Massah, H., and Ghasemi, F., 2002 “Investigating the Effects of Viscosity in Bubble Oscillations of Large Amplitudes”, The 9th Asian Congress of Fluid Mech., Isfahan Univ. of Tech., Isfahan, Iran.

198. Ramazanizadeh, M. and Taeibi-Rahni, M., 2002 “Large Eddy Simulation of a Two-dimensional Flat Plate Film Cooling”, The 9th Asian Cong. of Fluid Mech., Isfahan Univ. of Tech.,Isfahan, Iran.

199. Kelich, M.R. and Taeibi-Rahni, M., 2002 “Computational Simulation of a Compressible Turbulent Flow over Non-symmetrical Bodies”, The 4th Annual Conf. of Iranian Aerospace Soc., Amirkabir Univ., Tehran, Iran (In Persian).

200. Kelich, M.R. and Taeibi-Rahni, M., 2002 “Numerical Simulation of Compressible Turbulent Flow around 2D Axisymmetric Bodies”, The 4th Annual Conf. of Iranian Aerospace Soc., Amir-Kabir Univ. of Tech., Tehran, Iran, pp. 189-198 (In Persian).

201. Taeibi-Rahni, M. and Razmi, A., 2002 “Different Aspects of Numerical Simulation of Film Cooling Phenomena” The 4th Annual Conf. of Iranian Aerospace Soc., Amir-Kabir Univ. of Tech., Tehran, Iran, pp. 675-685 (In Persian).

202. Taeibi-Rahni, M. and Sharafatmand, Sh., 2002 “Numerical Simulation of a Droplet in a Quiescent Fluid”, The 4th Annual Conf. of Iranian Aerospace Soc., Amir-Kabir Univ. of Tech., Tehran, Iran, pp. 122-130.

203. Ghasemi, F., Moshaii, A, Sadighi-Bonabi, R., Taeibi-Rahni, M., and Massah, H., 2001 “Investigation of Temperature Dependency of Sonoluminescence Phenomena” The 8th Photonic Cong. of Phys. Soc. of Iran, Malek Ashtar Univ. of Tech., Shahin-Shahr, Isfahan, Iran, pp. 1-6 (In Persian).

204. Bondar, F. and Taeibi-Rahni M., 2001 “The Central Roles of Fractal, Bifurcation, and Chaos in Optimal Fluid Mixing”, Forum on Bifurcation, Instability, and Hysteresis in Fluid Flow”, ASME Int. Mech. Eng. Cong. and Expos. , New York City, N.Y., U.S.A.

205. Ebrahimi-Kebria, H.R., Haji-Mirza-Amin, M.R., and Taeibi-Rahni, M., 2001 “Comparison of Direct Numerical Simulation and Turbulence Modeling for Prediction of Film Cooling”, The 9th Annual (5th Int.) Conf. of Iranian Mech. Eng. Soc., Gilan Univ., Rasht, Iran.

206. Ramazanizadeh, M. and Taeibi-Rahni, M., 2001 “Large Eddy Simulation of Multiple Jets into a Cross Flow, Using Smagorinsky Model”, The 9th Annual (5th Int.) Conf. of Iranian Mech. Eng. Soc., Gilan Univ., Rasht, Iran.

207. Naderi, A.R. and Taeibi-Rahni, M., 2001 “Direct Numerical Simulation of Flow over Moving Squared Section Cylinder”, The 9th Annual (5th Int.) Conf. of Iranian Mech. Eng. Soc., Gilan Univ., Rasht, Iran.

208. Taeibi-Rahni, M. 2000 “How Are Turbulence and Fluid Mixing Related to Chaos?”, ISME2000, The 8th Annual Conf. of Iran

  Computer Programming and Algorithm

  Statics

  Dynamics

  Fluid Mechanics I

  Fluid Mechanics Laboratory

  Aerospace Eng. Technical Presentation

  Aerospace Eng. Technical English

  Aerodynamics I

  Aerodynamics II

  Flight Mechanics I

  Introduction to Computational Fluid Dynamics (CFD)

  Viscous Flow

  Advanced Viscous Flow

  Advanced Aerodynamics

  Aerohydrodynamics

  CFD I

  CFD II

  Subsonic Aerodynamics

  Turbulent Flow

  Turbulent Shear Flow

  Turbulence Simulation

  Multiphase Flow

  Acoustics

  M.Sc. Seminar

  A.R. Naebi

  Y. Jafari

  E. Azadi

  K. Goharian Mohammadi

  M. Ziatabar

  A. Golmakani

  Z. Shahriari

  M. Sadat kiaee

  A. Solati

  J. Borhani

  Vaziri Moghaddam

Phone: +9821 6602 2731

Email: taeibi sharif.edu

Google Scholar: https://scholar.google.com/citations?user=Op7G8YoAAAAJ&hl=en&oi=ao