Applied Optics, Application in Experimental Fluid Mechanics (PIV, Shadowgraphy, …)

  Computational Fluid Dynamics, Especially in the Two-Phase Flow and Spray-Atomization

  Instability Study, Especially in Two Phase Flow Jet and Stabilizing Swirling Flows

  Mechatronics, Especially in Artificial Intelligence in Autonomous Robots

1. A. Rajabi, E. Javadi, S. R. Pejman Sereshkeh, M. R. Morad, A. Kebriaee, H. Nasiri, and S. A. A. Razavi Haeri, Experimental characterization of an extended electrohydrodynamic cone-jet with a hemispherical nozzle, Physics of Fluids 30, 114108 (2018).

2. A. Kebriaee, S. Kashanj, Gh. Olyaei, Fishbone Pattern Formation due to Asyymmetris in Colliding Low-Velocity Jets, Atomization and Sprays, 28(8):1–12 (2018).

3. A. Kebriaee , Gh. Olyaei, Semi-analytical prediction of macroscopic characteristics of open-end pressure-swirl injector, Aerospace Science and Technology 82–83 (2018) 32–37.

4. A. Kebriaee, M.J. Akbari, & F. Abbasi Zarrin, Droplet Shadow Velocimetry Based on Monoframe Technique, Atomization and Sprays, 28(7):581–598 (2018).

5. A. Kebriaeea, M.R. Morad, A. Rajabi, H. Nasiri, S.R. Pejman, S.A.A. Razavi Haeri, E. Javadi, LED nanosecond pulsed imaging for electrohydrodynamic liquid breakup of a modified nozzle, Experimental Thermal and Fluid Science 98 (2018) 546–556.

6. S. Rezayat, M. Farshchi, H. Karimi, and A. Kebriaee, Spray Characterization of a Slinger Injector Using a High-Speed Imaging Technique, JOURNAL OF PROPULSION AND POWER, DOI: 10.2514/1.B36498

7. آزاده کبریایی، حمیدرضا نصیری، طراحی سامانه سایهنگاری پرسرعت جهت محاسبات ابعادی و سرعت ذرات، دوفصلنامه علمی– پژوهشی مکانیک سیالات و آیرودینامیک، جلد 5، شماره 1، بهار و تابستان 1315 صفحه 55 الی 73

8. Sajad jafari, Azadeh kebriaee, "Genetic Algorithm Implementation in Maximum Entropy Principal Method to Predict Spray Characteristics", Imperial Journal of Interdisciplinary Research, Vol 3, No. 1 (2017).

9. عطاالله پورمحمود، مصطفی قربان حسینی، آزاده کبریایی؛ محمد فرشچی, "بررسی تجربی پارامترهای عملکردی یک انژکتور پیچشی تک پایه", نشریه علمی – پژوهشی سوخت و احتراق، دوره 9 - شماره 1 - شماره پیاپی 17

10. حمیدرضا نصیری، آزاده کبریایی، علی اصغر حائری رضوی، "طراحی و ساخت استروبوسکوپ پرتوان دیودی جهت ایستا نمودن پدیده های سریع"،

11. Ali Nouri-Boroujerdi, Azadeh Kebriaee, “Numerical Simulation of Laminar and Turbulent Two-Phase Flow in Pressure-Swirl Atomizers”, AIAA Journal, Vol. 50, No. 10 (2012), pp. 2091-2101. (DOI: 10.2514/1.J051331)

12. Ali Nouri-Boroujerdi, Azadeh Kebriaee, “Simulation of Turbulent Swirling Flow in Convergent Nozzles”, Scientia Iranica Journal, Vol. 19, No. 2 (2012), pp. 258–265. (DOI: 10.1016/j.scient.2012.01.006)

13. Ali Nouri-Boroujerdi, Azadeh Kebriaee, “Upwind Compact and Explicit High Order Finite Difference Schemes for Level Set Technique”, International Journal for Computational Methods in Engineering Science & Mechanics, Vol 13, No. 4 (2012), pp. 308-318, (Doi:10.1080/15502287.2012.682198)

14. Saman Tashakor, Ghasem Jahanfarnia, Azadeh Kebriaee, “Numerical model for estimation of corrosion location in nuclear power plant steam generators”, Nuclear Engineering and Design, Vol. 241, No. 1 (2011), pp. 95-100, (DOI: 10.1016/j.nucengdes.2010.10.020)

15. Reza Maddahian, Azadeh Kebriaee, Bijan Farhanieh, and Bahar Firoozabadi, “Analytical investigation of boundary layer growth and swirl intensity decay rate in a pipe”, Archive of Applied Mechanics, Vol. 81, No. 4, pp. 489-501.(DOI: 10.1007/s00419-010-0424-9)

16. Pedram Hanafizadeh, Mohammad Hasan Saidi, Masoud Darbandi, and Azadeh Kebriaee, “Numerical Simulation of Two-Phase Flow in Airlift Pumps Using the Physical Influence Scheme”, Progress in Computational Fluid Dynamics, Vol. 10, No. 3, pp. 186-194 (2010). (DOI: 10.1504/PCFD.2010.033330)

1. Ali Nouri-Borujerdi, Azadeh. Kebriaee, “Modeling of Droplet Formation in Condensation Process in Eulerian-Lagrangian System”, 10th Fluid Dynamic Conference, Yazd University, Yazd, Iran, October 2006.

2. Ali Nouri-Borujerdi, Azadeh. Kebriaee, “Pressure Loss of Turbulent Swirling Flow in Convergent Nozzles”, 18th Annual International Conference on Mechanical Engineering, Sharif University, Tehran, Iran, May 2010.

3. Ali Nouri-Borujerdi, Azadeh. Kebriaee, “Instability Investigation of Taylor-Couette Flow with an Axial Velocity”, 19th Annual International Conference on Mechanical Engineering, Birjand University, Birjand, Iran, May 2011.

4. Azadeh Kebriaee, Hamidreza Nasiri, “Mechanical Design Procedure and Computer Based Simulation of Autonomous Underwater Vehicle”, 17th International Unmanned Untethered Submersible Technology Conference (UUST), Portsmouth, NH, USA, August 2011.

5. Azadeh Kebriaee, Hamidreza Nasiri, “Optimum Design and Simulation of Ducted Contra-Rotating Propellers with Lifting-Line Theory, Neural Network, and Genetic Algorithm”, 17th International Unmanned Untethered Submersible Technology Conference (UUST), Portsmouth, NH, USA, August 2011. Awarded as Best Student Paper

6. Azadeh Kebriaee, Hamidreza Nasiri, “The AUV Design Based on Component Modeling and Simulation”, International Conference on Ocean Systems Engineering (ICOSE), Seoul, Korea, September 2011.

7. Hamed Karimi, Sajad Rezayat, Azadeh Kebriaee, Mohmmad Farshchi, “Flow Simulation Inside Fuel Pipe of Slinger Injector”, The 14th International Conference of Iranian Aerospace Society, Tehran, Iran, March 2015.

8. Hamed Karimi, Sajad Rezayat, Azadeh Kebriaee, Mohmmad Farshchi, “Simulation of Spray Structure Due to Liquid Column Splashing in Air Cross Flow”, The 14th International Conference of Iranian Aerospace Society, Tehran, Iran, March 2015.

9. Hamed Karimi, Sajad Rezayat, Azadeh Kebriaee, Mohmmad Farshchi, “Flow Simulation inside Disk of Slinger Injector”, The 14th International Conference of Iranian Aerospace Society, Tehran, Iran, March 2015.

10. Sajad Rezayat, Hamed Karimi, Azadeh Kebriaee, Mohmmad Farshchi, “Experimental Study on Liquid Breakup of Slinger Injector”, The 14th International Conference of Iranian Aerospace Society, Tehran, Iran, March 2015.

11. Sajad Rezayat, Hamed Karimi, Azadeh Kebriaee, Mohmmad Farshchi, “Experimental Measurement of Droplet Size in Slinger Injector”, The 14th International Conference of Iranian Aerospace Society, Tehran, Iran, March 2015.

12. Sajad Rezayat, Hamed Karimi, Azadeh Kebriaee, Mohmmad Farshchi, “Experimental Correlation between Sauter Mean Diameter and Subcritical Weber Number in Slinger Injector”, The 14th International Conference of Iranian Aerospace Society, Tehran, Iran, March 2015.

13. Mahsa Janmohammadi, Azadeh Kebriaee, Mohmmad Farshchi, “Simulation of Internal and External Flow in the pressure Swirl Injector”, The 14th International Conference of Iranian Aerospace Society, Tehran, Iran, March 2015.

14. Hamed Karimi, Azadeh Kebriaee, Sajad Rezayat, Mohmmad Farshchi, “Numerical Study on Spray Structure of Emanating Liquid from Disk of Slinger Injector”, The 14th International Conference of Iranian Aerospace Society, Tehran, Iran, March 2015.

15. Azadeh Kebriaee, Ataollah Poormahmood, Mostafa Ghorbanhosseini, Hamed Khosrobeigi, “Development and Validation of a Numerical Method for Initial Prediction of Combustion Chamber Length”, The 14th International Conference of Iranian Aerospace Society, Tehran, Iran, March 2015.

16. Ataollah Poormahmood, Mostafa Ghorbanhosseini, Hamed Khosrobeigi, Azadeh Kebriaee, Mohammad farshchi, “Experimental Study on Performance Characteristics of a Simple Swirl Injector and Comparing by Presented Theories”, The 6th Fuel and Combustion Conference of Iran, Mashhad, Iran, Feb. 2016.

17. Sajad Jafari, Azadeh Kebriaee, “Hydrodynamics Instability Investigation of Liquid Film Using Coupled VOF - Level Set Method”, 9th Internation Conference on Internal Combustion Engines and Oil, Tehran, Iran, Feb. 2016.

18. Azadeh Kebriaee, Hamidreza Nasiri, Design of High Speed Shadowgraphy System for Sizing and Velocimetry of Particles, 1st International Conference on Mechanical and Aerospace Engineering, Tehran, Iran, April 2016.

19. Sajad Jafari, Azadeh Kebriaee, Investigation on Nonlinear Instability of Liquid Jet, 24th Annual International Conference on Mechanical Engineering, Yazd, Iran, April 2016.

20. Sajad Jafari, Azadeh Kebriaee, Investigation on Nonlinear Instability of Liquid Film in Pressure Swirl Injector, 24th Annual International Conference on Mechanical Engineering, Yazd, Iran, April 2016.

21. Azadeh Kebriaee, Hamidreza Nasiri, Seyed Ali Asghar Razavi Haeri, Design and Product of a High Power Diode-Based Stroboscope to Freeze Fast Phenomenon, 1st International Conference on New Research Achievements in Mechanics, Mechatronics and Biomechanics, Tehran, Iran, May 2016.

22. Sajad jafari, Azadeh Kebriaee, Shahin sohrabi, A Comprehensive Predictive Model to Anticipate Droplets Size Distribution in Pressure Swirl Atomizer, ILASS–Europe 2017, 28th Conference on Liquid Atomization and Spray Systems, 6-8 September 2017, Valencia, Spain http://dx.doi.org/10.4995/ILASS2017.2017.4845

23. Hamed Dolatkhahi, Ghader Oliaee, Azadeh Kebriaee, Numerical Simulation of Like and Unlike Impinging Jets, ILASS–Europe 2017, 28th Conference on Liquid Atomization and Spray Systems, 6-8 September 2017, Valencia, Spain http://dx.doi.org/10.4995/ILASS2017.2017.4865

24. Azadeh Kebriaee, Sina Kashanj, Mohammad Baharloo, Effect of Misalignment on Liquid Sheet Break-up of Two Impinging Jets, The 7th Fuel and Combustion Conference of Iran (FCCI-2018)

25. Azadeh Kebriaee, Hamidreza Nasiri, Seyed Ali Asghar Razavi Haeri, High Speed Schlieren by Using High Power Light Emitting Diodes, The 7th Fuel and Combustion Conference of Iran (FCCI-2018)

26. محمد جواد اکبری، آزاده کبریایی، علیرضا رنجبریان، اصلاح خطاي ترموكوپل جهت اندازه¬گيري توزيع شعاعي دماي شعله، هفتمين کنفرانس سوخت و احتراق ایران 24و 25 بهمن 1396، ایران، تهران، دانشگاه صنعتی شریف

  Thermodynamics I

  Thermodynamics II

  Heat Transfer

  Viscous Flow

  Advanced Mathematics I

  Advanced Mathematics II

  Advanced Thermodynamics

  Perturbation Theory

  Best Paper Award, Tehran, Iran, 1st International Conference on New Research Achievements in Mechanics, Mechatronics, Biomechanics May 2016.

  Best Paper Award, Tehran, Iran, 1st International Conference on Mechanical and Aerospace Engineering April. 2016

  Best Paper Award, Mashhad, Iran, 6th Fuel and Combustion Conference of Iran Feb. 2016

  Best PhD Thesis, Tehran, Iran, The Iranian Society of Mechanical Engineering May. 2013

  Best PhD Thesis, Tehran, Iran, 6th Sharif Mechanics Industrial Festival Jan. 2012

  Best Student Paper Award, NH, USA, 17th International Unmanned Untethered Submersible Technology Conference (UUST) Aug. 2011

  First Place Award, Isfahan, Iran, Mechanical Manager of Best Team in Detail Design among More than One Hundred University and Industrial Groups, Second Iranian National Autonomous Submersible Vehicle Competition (ASVC) Oct. 2010 - Aug. 2011

  First Place Award, Tehran, Iran, Mechanical Manager of Best Team in Detail Design among More than One Hundred University and Industrial Groups, Second Iranian National Autonomous Surface Vehicle Competition (ASVC) Aug. 2010 - May. 2011

  First Place Award, Isfahan, Iran, Mechanical Manager of Best Team in Detail Design among More than One Hundred University and Industrial Groups, First Iranian National RC Submarine Competition (RCSC) Aug. 2009 - April. 2010

  Special Design Award, Tehran, Iran, Mechanical Manager of Best Team in Artificial Intelligence Design among All Other Groups, First Iranian National RC Boat Competition (RCBC) Aug. 2007 - Oct. 2008

  Sajad Jafari:

  Hamed Dolatkhahi:

  Mahdi Azizi:

  Vida Lashani:

  Sina Kashanj:

  Fateme Abbasi Zarini:

  Ali Hashemi:

  Sajad Kazemi:

  Mohammad Javad Akbari:

  Hasan Gholamzadeh:

  Hoseinali Ghodrati:

  Mona Derakhshan:

  Ariz Mohammadi:

  Hasan Rezaee

  Hamid Koohpeymaye Jahromi:

  Danial Ahrari:

  Mohammad Javad Akbari:

  Narges Montazeri:

  Mohammad Lashgar Bolooki:

  Mehrdad Khodad Beigi:

  Ghader Oliaee

Phone: (+98) 21 6616 4600

Fax: (+98) 21 6602 2731

Email: kebriaee sharif.edu

Google Scholar: https://scholar.google.com.ua/citations?user=lsBY_4YAAAAJ&hl=en